Seite 10
IMPORTANT! WICHTIG! - Device must be on arm - Gerät muss montiert sein - Arm must be in mount - Arm muss in Halterung sein Bring the arm to a position approximately Vor dem justieren der Einstellschraube drücken horizontal prior to turning the strength Sie den Arm nach unten bis er ungefähr adjustment screw.
Seite 11
With arm in horizontal position, tighten set screw (B) Mit Arm in horizontaler Position,Stellschraube anziehen (B) Do not overtighten the screws. Schrauben nicht zu fest anziehen. 17.1074 - FS TeleFloat QP 17.1084 - FS TeleFloat Light QP 01.0436 01.0657 01.0436...