Werbung
1. Connect the USB Type-C
The computer will automatically install some of the required drivers once it is connected to
your notebook's USB Type-C
(s), follow the on-screen instructions to complete the installation.
2. Connect your external display to one of the adapter's video ports
After connecting the IB-DK1 104-C, drivers that may be required are automatically installed or
updated. To complete the installation, follow the instructions that pop up during the automatic
installation.
Note: Video output capabilities are dependent on the video card and hardware specifica-
tions of your connected host notebook. Certain graphics cards have limited support, while
some monitors will also limit the output resolution.
Configure a display device
Please set up your display settings according to your operating system and requirements.
For detailed information, see the corresponding operation manual and description of your
operating system.
Supported video resolutions
The DockingStation supports:
- Ultra HD resolution via HDMI
- Full HD resolution via DVI-D or VGA if the connected display supports it.
Note: Only one connected monitor can be used at a time!
Number of attached displays
1
1
1
1
Manual IB-DK1104-C
®
cable to a supported host computer
port. If you receive a prompt to automatically install the driver-
®
or DisplayPort
®
™
Video output configuration
HDMI
®
DisplayPort
™
DVI-D (single lane)
VGA
if the connected display supports it.
Maximum resolution/monitor
3820x2160@60 Hz
3820x2160@60 Hz
1920x1200@60 Hz
1920x1080@60 Hz
Werbung
