Security System - Lex Fh2000Wb Bedienungsanleitung

3.
2.
1.
HEAT SETTING:
The heating fan has a rotating switch. By rotating this switch you can set the following
features:
OFF | FAN | I. WARM AIR (1000 W) | II. WARM AIR (2000 W)
THERMOSTAT:
When the heating fan is switched on:
Turn the thermostat button clockwise to the maximum position.
Once the room temperature reaches the desired value, slowly turn the thermostat button
counterclockwise until you hear a clicking noise. This is the set temperature. Now the device
is turned off and the display lights are extinguishing.
The device automatically keeps the set temperature. It switches on as soon as the room tem-
perature is below the set temperature, and off again when the room temperature is above the
set temperature. The red display light indicates that the device is on.

SECURITY SYSTEM:

This device has a security system that automatically turns the device off when it overheats.
If overheated, pull the power plug out of the power socket, turn off the device with the
buttons and let it cool for at least 10 minutes. Plug the power plug back into the power
socket and turn the device back on.
USER MANUAL
4.
1. display light
2. thermostat control switch
3. air outlet grille
4. heat choice switch
EN