Werbung
OPERATION DESCRIPTION
Metric-English Display Switch:
Press and hold the Keys "1"and "4"at the same time for more than 3 seconds, the display height is
switched between male and Engish,power off save settings.
Code Descripition And Processing Methods:
1.The code "rSt" indicates that it is currently in the reset preparation state.You can press and hold
the Key "
" to reset it in the preceding way.
2.The code "Erl"
is not currently returned.Press and hold the Key "
preparation state.After check and handle it properly.
3.The code "Hot"
more than 18 monutes before mormal use.
4.If the above method does not solve the problem,umplug the power supply,check all components
of the system and the connection are in good condition,and then power on and re-operate.
5.If the desk still fails to work,contact customer service.
indicates a fault,which may be that the motor is not rotaing and hall data
indicates that the system is overheated ,allowing the system to rest for
"in the above way to enter the reset
４０
Werbung
