COOLSTUFF MINI FRIDGE Gebrauchsanleitung Seite 4

Operating Instructions
1. Place the appliance on a flat surface before use. You could place the
unit standing either vertically or horizontally.
2. Set the Power switch to the "OFF" position.
3. Use the cord to connect the power adaptor to the power jack and a
power socket (AC power supply, 100-240V~50Hz).
4. Switch the Power switch to either HOT or COOL position to select the
desired function.
5. For the cooling function, make sure the power switch is at the "Cool"
position (its lower position). A green indicator light will indicate that the
unit is in cooling mode.
6. For the warming function, make sure the power switch is at the "Hot"
position (its upper position). A red indicator light will indicate the unit is
in warming mode.
7. Unplug the unit when not in use; otherwise, the mini-fridge will still be
in standby mode, shortening its lifespan.
Troubleshooting
Problem
Water leaks out from
the unit.
The unit is not
cooling or warming.
Probable Cause
Power supply is cut off.
Temperature variance (from
low temperature to high
temperature suddenly).
The door is opened.
Wet surface from food or drink.
Power supply is cut off.
"Hot/ Cool" switch in
"OFF" position.
The back vent is blocked.
Poor air circulation.
The unit under sunlight or
near the hot appliance.
Probable Solution
Check the power supply and
check that the plug is well
connected.
Normal situation, not
malfunction.
Close the door.
Wipe off water on the
surface of the food or drink
before storing it.
Check the power supply
and check the plug is well
connected.
Set the Power switch to Hot
or Cool mode.
Keep space 10cm from side
and rear.
Leave space between
foodstuffs to help air
circulation.
Move the unit to a cool and
dry place.