Installing The App; Installing The Product; Creating An Automated Action - nedis WIFISA10CWT Kurzanleitung

• Only use the product as described in this document.
• Do not use the product if a part is damaged or defective. Replace a damaged
or defective product immediately.
• Do not drop the product and avoid bumping.
• Do not expose the product to water or moisture.
• Disconnect the product before cleaning.
• Do not use aggressive chemical cleaning agents such as ammonia, acid or
acetone when cleaning the product.
• Do not clean the inside of the product.
• This product may only be serviced by a qualified technician for maintenance
to reduce the risk of electric shock.
Explanation of the safety symbols on the product
Icon Description
Indication to explain that the product should not be used in a
bathtub, shower, or water-filled reservoir.

Installing the app

Follow the instructions in image B and in the Nedis SmartLife app.

Installing the product

Follow the instructions in the images C – I.
The indicator LED A
If A does not blink, press the reset button A
1
4
product and enter pairing mode.
Adding the product to the Nedis SmartLife app
Follow the instructions in image J and in the Nedis SmartLife app.

Creating an automated action

An automated action is used to trigger an action when the product detects a
4
change in the household environmental conditions.
Follow the instructions in the images K – L and in the Nedis SmartLife app.
For more in-depth instructions, please visit the website: ned.is/wifisa10cwt
4
blinks to indicate pairing mode is active.
1
2 for 5 seconds to reset the
9