Ultron selfie BT deluxe Bedienungsanleitung Seite 3

selfie BT deluxe
Selfie Set mit Teleskoparm, BT Shutter , Stativ, 3 in1 Fotolinse und Tasche
Selfie Set with monopod, BT shutter, tripod, 3 in1 photo lens and bag
Thank you for choosing an ultron product!
Starting it up:
• It has been recommended to completely charge the accumulator of the Bluetooth shut-
ter release before starting it up for the first time.
• To do so, connect the Bluetooth shutter release to a USB/AC adaptor or to the USB port
of a PC or notebook using the USB cable included in the delivery.
• The integrated LED flashes in red during the charging process.
Bluetooth pairing:
• Press and hold the shutter release button in order to activate the Bluetooth pairing
mode – The LED flashes in blue as soon as the pairing mode has been activated.
• Select the „selfie BT deluxe" from the Bluetooth list of your smartphone – the LED is
continuously illuminated as soon as the pairing has been completed.
• If you do not use the BT shutter for 10 min., it switches over to the "Sleep mode", in
order to save power.
• By shortly pressing the shutter release button, you would reactivate the BT shutter release.
• Press the camera button to take a photo.
• Press and keep the shutter release button pressed until the LED consecutively flashes
three times, in order to switch off the shutter release.
Selftimerbutton
Detachable
shutter
Unlock
Lock
Technical data:
• Bluetooth V3.0 (range of 10 m)
• Battery capacity BT shutter: 55 mAh (for about 1000 photos)
• Dimensions: 24.5 x 2.4 cm
• Extensible from 24.5 to 95 cm
• Weight: 177 g
• Compatible with Android 4.2.2 or higher or iOS 6.0 or higher
• 3 in1 photo lens:
Safety belt
Scope of delivery:
• Aluminium alloy monopod,
Mobile holder
• Bluetooth remote shutter,
• Holder with safety band,
• Charging cable
• Pouch,
• 3 in 1 lens incl. clip for smartphones (Fish eye, wide 0.7X and macro)
• Tripod
Install the selfie shutter belt