Herunterladen Inhalt Inhalt Diese Seite drucken

ghd unplugged Bedienungsanleitung Seite 4

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 8
EN
2. Do not place or store the
appliance where it can fall or be
pulled into a bath, basin or sink.
3. Do not reach for the for
the appliance if it has fallen into
water.
4. Do not spray or apply wet styling
aids directly onto the ghd styler.
warning: electricity
As with most electrical appliances, electrical parts are electrically live even when the switch
is off.
Not to br reproduced
To reduce the risk of electrocution:
Never operate this appliance if it is
not working properly, or if it has a
damaged charging cable or charger.
1. Only use with 100–240V, 50-60 Hz power supply for the charger.
2. The appliance should never be left unattended when plugged in and charging.
3. Always unplug the ghd unplugged styler and charger immediately after completing charging.
warning: hot surfaces
The ghd styler heater plates are hot for effective styling.
To reduce the risk of burns:
1. NEVER touch the styler heater plates.
2. Avoid holding or touching the styler beyond the raised finger guard.
3. When not styling always lay the ghd styler on a flat heat-resistant surface
such as a ghd styler heat mat.
4. When styling is complete, always switch off the ghd unplugged styler and
replace in the heat resistant carry case.
5. Always place the appliance with the stand, if any, on a heat-resistant, stable
flat surface.
5
Your ghd styler is not only
attractive to you, but also to your
children. Please ensure you
always store your ghd styler out
of reach of children, particularly
during use, especially when
cooling.
For safe cooling, you can place the unit back into its heat resistant carry case.
charging
For the quickest and most effective charging, always use the ghd supplied charger and USB-C cable.
1. For optimum usage the ghd unplugged styler should be fully charged before use – this will take
no more than two hours.
2. Ensure the ghd unplugged styler is switched off before charging.
3. Plug the charger into the wall outlet, connect the USB-C cable between the charger and the
ghd unplugged styler, and turn on the mains power at the wall.
4. Charge the ghd unplugged styler until all five battery charge lights are illuminated and stop
flashing.
5. The ghd unplugged styler may get warm to the touch while charging – this is normal.
6. Once charging is complete, disconnect the ghd unplugged styler from the USB-C cable and
enjoy styling cord-free.
IMPORTANT NOTE: The ghd unplugged styler cannot be used while it is charging, unplug from
the charger and then follow the operation instructions.
IMPORTANT NOTE: Use the charger provided for optimal charging.
6

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis