Firmware-Upgrade - Lotus SmarTime 50040 Benutzerhandbuch

2.13 Watch face
1) Watch faces available in the app
When connected you can select between
several dials in the app and push it to the
watch. Go to App/Device/Watch face, select
your favorite dial by tapping and tap Sync to
watch. The watch restarts when selected Dial
is uploaded.
2) Customized Watch face
Go to App/Device/Watch face, select the
dial with a camera icon. Tap on the dial and
Chose to Take a photo or Select from album.
When ready tap Sync to watch. The watch re-
starts when the dial is synchronized.
2.14 Firmware upgrade
The watch firmware version is indicated here
and if there is a new version for the watch
it will be noticed. To update the firmware,
please follow the instructions in the app.
FAQ
Please avoid prolonged exposure of this de-
vice to extreme temperatures as it may cause
permanent damage.
Why can't I wear the watch to take a hot
shower?
When the water temperature changes rap-
idly, water vapor or condensation is created.
The water vapor is in the gas phase and the
size of the molecular so minute so it can eas-
ily enter the watch. The internal circuit of the
watch can then short-circuit, which may dam-
age the circuit board of the watch and affect
the functioning of the watch.
Why wont the watch turn on? Why won't
it charge?
If when you receive the watch and it does not
power up immediately, it may be that a colli-
sion during the transport of the watch has af-
fected the battery. Plug in the charging cable
for activation.
If the battery level is too low, or if the watch
has not been used for a long time and will
not turn on, please plug in the charging ca-
ble and charge it for more than half hour to
activate it.
By virtue of the regulations pursuant to the handling of waste products deriving from electronic and electrical equipment, end of lifecycle
watch making products must be selectively collected for processing. You may therefore dispose of your quartz watch making products
at any of our retail outlets or any other authorized collection point. The selective collection, processing, rating and recycling of these
products helps contribute to safeguarding the environment and protecting our health.
Disclaimer
The method of capturing the heart rate
through an optical sensor used by this LO-
TUS watch does not reach the level of preci-
sion and accuracy of a professional medical
device, nor can it guarantee the equivalent
stable readings. The watch cannot replace a
medical device in its function of detecting or
diagnosing pathologies, heart or other dis-
eases.
Consequently and with respect to this func-
tion, the device is for recreational use only.
Multiple factors (including level of skin con-
tact, pigmentation, tattoos, sudden arm
movements etc) can alter the accuracy of the
data provided by the sensor. Please keep in
mind that the actual heart rate may be high-
er or lower than the reading indicated by the
optical sensor at a given time.
If you suspect any anomaly, always consult
your doctor and in case of emergency, im-
mediately contact the emergency services in
your area.
Festina Lotus SA assumes no responsibility
for any claim that may arise from the use and
/ or interpretation that the user of the device
and / or third parties may make of the heart
rate information provided by their devices.
12 12