EN
Light
Button
Function
Position
Reversing
light
Headlight
Emergency
Flashers
Rear light
LED1#
Left turn
signal
Rear turn
signal
Right turn
signal
Transmitter Battery Installation
Battery Type: AAA
Battery Installation:
1. Open the battery compartment cover.
2. Insert 4 fully-charged AAA batteries into the compartment. Make sure that the
battery makes good contact with the battery compartment's contacts.
3. Replace battery compartment cover.
Low battery alarm: When the battery is lower than 4.2V, the LED on the
panel will flash slowly.
Note: When installing the batteries, be careful to handle the positive and
negative poles. (As shown in the picture on the right)
Times for Pressing
Power on is
I
II
off by default
•
OFF
OFF
OFF
•
•
III
Control Mode
OFF
•
Throttle linkage
•
control
Direction linkage
controL
Direction linkage
controL
3
Remarks
The reversing lamp is on
during reversing operation