Herunterladen Diese Seite drucken

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

1. Product description
Please read this instruction manual carefully before use and operate the heater
properly. Keep the user manual in a safe place for later reference.
This product is an electric heater with ventilator/fan motor, can be used in household.
It incorporates a thermostat and a self-reset overheat thermal cut-out. The thermostat
feels the air inlet temperature and controls the room temperature, is 0-40C
adjustable. The self-reset overheat thermal cut-out controls the temperature of air
outlet. It will switch off the heater by overheating to ensure the safe use. The fan
motor is not controlled by thermostat. When the thermostat cuts off the heating
element the ventilator keeps working on.
SAFETY INSTRUCTIONS
Warning: In order to avoid overheating, do not cover the heater.
When using electrical appliances basic precautions should always be followed,
including the following:
1) Do not connect the appliance to the mains power socket if the voltage given on
the rating plate differs from the mains voltage.
2) Children should be supervised to ensure that they do not play with the appliance.
If the appliance is damaged, do not use it any more.
3) Do not use outdoors or in humid place. Never use the heater in the bathroom,
shower or near a swimming pool etc.
4) Do not place the appliance on moving vehicles or some where easy to be tipped
over.
5) When you don't use the appliance for a long time, unplug the appliance. Don't
leave the heater for a considerable amount of time when in use. Pull the plug
straight out, never remove the plug by pulling on the cord.
6) Use the appliance in places with good air ventilation, do not position it near a
wall or corner.
7) When the appliance is in use, keep it far from combustible, explosive articles or
explosive, corrosive gas. Keep the heater far from curtain or places where the air
Fan Heater
User manual
1133

Werbung

loading

Inhaltszusammenfassung für Doctor-San 1133

  • Seite 1 Fan Heater User manual 1133 1. Product description Please read this instruction manual carefully before use and operate the heater properly. Keep the user manual in a safe place for later reference. This product is an electric heater with ventilator/fan motor, can be used in household.
  • Seite 2 Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided. 2. Technical specifications Art# 1133: AC 230V, 50Hz, 3300W Class I, IP24 Packing dimension: 385X285X359mm...
  • Seite 3 Net weight: 6.2kg Gross weight: 6.9kg Electric connection: through coupler and plug 3. Product description and operation ⑴Shell (2) Air outlet (3) Heating tube ⑷ Feet ⑸ Handle ⑸ Thermostat knob (7)Switch knob (8)Motor (9)Air inlet...
  • Seite 4 Control Panel Rotary switch with 2 levels and 3 positions, the first level is ventilator only, the second level is 3.3kW heating power .0~40C adjustable thermostat to control the room temperature,the thermostat button can be turned from 0 to 270 degree. THERMOSTAT INSTRUCTIONS At first turn the thermostat to “Max”...
  • Seite 5 Installation case Illustrate: Use M5X22 Screw 、Ø5 spring washer、 Ø5x10 flat washer、 Ø4x8 Rubber washer fit on shell,Tighten the M5X22 screw. Connect with duct Installation case Illustrate (Only for D033FT-G)
  • Seite 6 The fan heater with Duct, dimension :¢250mm. ( standard lenght:7M ). Caution Connect with duct, Never place the pipes less than 90° , An angle of 90° is acceptable; Outlet hose An outlet hose can be fitted to the outlet of the heater, in order to blow heated air to a remote space away from the heater.
  • Seite 7 - Damage caused by non-observance of the user manual, e.g. connection to an unsuitable mains supply or non-compliance with the installation instructions - Partially or completely dismantled appliances MF Trading GmbH doctor-san® Sanierungstechnik Ferdinand-Porsche-Straße 6 82205 Gilching Tel.: 08105 730 50 58 info@doctor-san.eu...
  • Seite 8: Sicherheitsvorschriften

    Heizlüfter Bedienungsanleitung 1133 1. Produktbeschreibung Bitte lesen Sie diese Bedienungsanleitung aufmerksam durch ehe Sie das Gerät in Betrieb nehmen, da nur so eine bestimmungsgemäße Verwendung gewährleistet ist. Bewahren Sie Ihre Bedienungsanleitung auf, um jederzeit darauf zurückgreifen zu können. Es handelt sich bei diesem Produkt um einen elektrischen Heizkörper mit Gebläsemotor, der sowohl für die Nutzung im Haushalt geeignet ist.
  • Seite 9 4) Stellen Sie den Heizer nicht auf sich bewegende Fahrzeuge oder in Bereiche, wo die Gefahr des Umkippens besteht. 5) Wenn Sie vorhaben das Gerät über einen gewissen Zeitraum nicht zu nutzen, ziehen Sie bitte den Netzstecker. Lassen Sie das im Betrieb befindliche Gerät nicht unbeaufsichtigt.
  • Seite 10: Technische Daten

    Raumtemperatur ausgestattet. Benutzen Sie es auf keinen Fall in kleinen Räumen, in denen die Personen wohnen, die nicht in der Lage sind, sich vom Raum zu verlassen, ausgenommen die ständige Beaufsichtigung vorgesehen wird. 2. Technische Daten Art# 1133: AC 230V, 50Hz, 3300W IP24, Schutzklasse I Abmessungen: 385X285X359mm Nettogewicht: 6.2kg Brutto-Gewicht: 6.9kg...
  • Seite 11 Bedienfeld Drehschalter, 2 Stufen und 3 Stellungen Erste Stufe: Nur Gebläsefunktion. Zweite Stufe: 3.3kW Regeln Sie die Raumtemperatur mit Hilfe des Thermostats. Der Temperaturregler kann um 270°gedreht und von 0 bis 40° C eingestellt werden.
  • Seite 12: Schema Für Die Montage

    BEDIENUNG DES TEMPERATURREGLERS • Drehen Sie den Temperaturregler erst auf Einstellung “Max” und lassen das Gerät mit voller Eingangsleistung laufen. Sobald die Raumtemperatur Ihren Wünschen entspricht, kann der Thermostat nach links gedreht werden, bis er sich ausschaltet. • Nun schaltet sich der Thermostat zur Temperaturregelung abwechselnd automatisch ein und aus und hält so die Raumtemperatur konstant auf dem eingestellten Wert.
  • Seite 13 Schema für die Montage der Verbindung mit Rohr(Nur für D033FT-G) Der Heizlüfter mit Rohr, Dimension : ¢ 250mm (Standardlänge: 7M). Warnhinweise Verbindung mit Rohr, stellen Sie niemals den Winkel des Rohrs kleiner als 90 ° , der Winkel von 90 °ist zulässig; Ablaufschlauch Ein Ablaufschlauch kann am Auslass der Heizeinrichtung versehen sein, um erhitzte Luft zu einem entfernten Platz von der Heizeinrichtung weg zu blasen.
  • Seite 14 Fremdkörper - Schäden die durch Nichtbeachtung der Gebrauchsanleitung entstehen, z.B. Anschluss an eine falsche Netzspannung oder Nichtbeachtung der Montageanleitung - Komplett oder teilweise demontierte Geräte MF Trading GmbH doctor-san® Sanierungstechnik Ferdinand-Porsche-Straße 6 82205 Gilching Tel.: 08105 730 50 58 info@doctor-san.eu...