Safety Information - Natec FELIMARE Bedienungsanleitung

INSTALATION
PAIRING A NEW DEVICE WITH KEYBOARD
IN BLUETOOTH MODE
• Turn on your computer or other compatible device.
• Turn on Bluetooth in the device you want to pair with the
keyboard.
• Hold down FN + BT1 or BT2 buttons for 3 seconds to select
Bluetooth mode.
• Flashing of the LED diode will notify of entering the pairing
mode.
• Select Natec Felimare from the list on your device.
• After successful pairing the LED diode on the keyboard will
stop flashing.
• The keyboard is ready for use.
+
CONNECTING THE KEYBOARD WITH THE
PREVIOUSLY PAIRED DEVICE
• Turn on Bluetooth on your device that you have previously
paired with the keyboard.
• Turn on the keyboard from hibernation by pressing any key.
• The keyboard will automatically connect with the device.
CONNECTION OF KEYBOARD VIA USB RECEIVER
• Turn on your computer or other compatible device.
• Connect included USB receiver to a free USB port on your
device.
• The operating system will automatically install the required
drivers.
• Press FN + 2.4G buttons to switch into connection mode 2.4
GHz, LED diode will flash once.
• The keyboard is ready for use.
+
REQUIREMENTS
• PC or compatible device with a USB port
• Bluetooth 4.0 or above
• Windows® 7/8/10/11, Linux, Android, iOS, Mac

SAFETY INFORMATION

• Recommended size of device for phone/tablet stand is up to
10". A larger device may tilt the keyboard. Manufacturer is
not responsible for damage caused by misuse.
• Use as intended, improper usage may break the device.
• Non-authorized repairs or disassembly voids the warranty
and may damage the product.
• Dropping or hitting the device may lead to device being
damaged, scratched or flawed in other way.
• Do not use the product in low and high temperatures, strong
magnetic fields and damp or dusty surroundings.
INSERTING / REMOVING
BATTERY
SELECTING THE OPERATING SYSTEM MODE
The keyboard allows to adjust the functions of the keys for
individual operating systems.
Press FN + Win | iOS | Android | Mac to select the operating
system mode.
+
CONNECTION MODE CHANGE
To change appropriate connection mode press the keys
FN + BT1 | BT2 | 2.4G.
+
TROUBLESHOOTING
If you have trouble connecting the keyboard to the USB receiver,
perform the pairing procedure.
• Disconnect the USB receiver.
• Reconnect the USB receiver.
• Hold down Fn + 2.4G buttons for about 3 seconds till flashing of
LED light.
• The keyboard will pair automatically with the USB receiver.
Note:
• The device is equipped with intelligent technology for energy
management and will enter the hibernation mode after few
minutes of not using it. Press any button to turn on the keyboard
from the hibernation mode.
• Flashing of LED indicator will inform you about low battery level.
Frequency band: 2402 Mhz – 2480 Mhz
Maximum radio-frequency power: -4 dBm
WARRANTY
• 2 years limited manufacturer warranty
GENERAL
• The safe product, conforming to the EU requirements.
• The product is made in accordance with RoHS European
standard.
• The WEEE symbol (the crossed-out wheeled bin) using indicates
that this product in not home waste. Appropriate waste
management aids in avoiding consequences which are harmful
for people and environment and result from dangerous materials
used in the device, as well as improper storage and processing.
Segregated household waste collection aids recycle materials
and components of which the device was made. In order to get
detailed information about recycling this product please contact
your retailer or a local authority.
• Hereby, IMPAKT S.A. declares that that the radio equipment type
NKL-1973 is in compliance with Directives 2014/53/EU,
2011/65/EU and 2015/863/EU. The full text of the EU declaration
of conformity is available via the product tab at www.impakt.-
com.pl.
EN