fontastic Lanty Bedienungsanleitung Seite 8

GB
2. Hand crank
Unfold the hand crank (20) on the back of the radio and turn
it clockwise or counterclockwise to charge the unit. Turn the
crank for 3-5 minutes at a speed of 130-150 rpm if you
are using the radio for the first time.
3. Micro USB
Connect the supplied Micro-USB cable to the Micro-USB input
(17) on the right side of the radio. Connect the cable to a
suitable power adapter (5 - 5.2 V, not included). Remove the
power adapter after it is fully charged.
Note: The battery of the Lanty is removable so that a
defective battery can be taken out to replace it with a new
one.
Functions:
● „POWER" button (10)
Long press the „POWER" button to turn the radio on/off.
● „BAND" button (7)
Band selection: Turn on the power, short press the „BAND"
button and select between AM/FM/WB.
7
Alarm function: Long press the „BAND" button when the power
is on to activate the alarm function. The radio will automatically
search for NOAA emergency signals. When signals are received,
the radio's flashlight and „SOS" siren function are automatically
activated.
● „VOL- and VOL+" button (6/4)
After power on, you can use the „VOL-/VOL+" buttons to adjust
the volume.
● „UP and DOWN" button (5/9)
Time reset: When the power is off, long press the „UP" button
to reset the time setting, including time system, hour and minute.
Then press the „VOL and VOL+" buttons to adjust the time
specifically and press the „UP" button to set;
Alarm time: Long press the „DOWN" button to reset the alarm,
press the „VOL and VOL+" button to set the alarm time and alarm
sound (tone/radio), and press the „DOWN" button to confirm.
Press any button to close the alarm clock.
Change station: Press the „UP / DOWN" button briefly to scroll
through the stations step by step. Long press the buttons to play
the next receivable station.