Personal Protective Equipment - HBM Machines PMS 150 Bedienungsanleitung

ON / OFF switch
The switch is provided with an EMER-
GENCY-STOP function. Open the flap cap
of the switch in order to switch the polishing
machine on.
Close the flap cap after switching on in
order to ensure the EMERGENCY-STOP
function.
WARNING!
After actuating the EMERGENCY-STOP button, the polishing machine will go on turning
up to 2 minutes.
Sleeves
Both sides of the shaft between the engine
and the polishing wheel are provided with
an sleeve. The shaft extensions are
covered with a nut.

Personal protective equipment

For certain work, personal protective equipment is required, such as:
• safety helmet,
• protective glasses or face guard,
• protective gloves,
• safety shoes with steel caps,
• ear protection.
Before starting work, make sure that the prescribed personal protective equipment is available
at the workplace.
CAUTION!
Dirty or eventually contaminated personal protective equipment might cause disease.
Clean your personal protective equipment
• after each use,
• regularly once a week.
Personal protective equipment for special work
Protect your face and your eyes: Wear a safety helmet with a face guard for every work, espe-
cially for any kind of work where your face and eyes are exposed to hazards.
ON/OFF switch
sleeve
nut