Troubleshooting; Transportation And Storage; Reciclying And Disposing - Greencut JET200L Betriebsanleitung

52

TROUBLESHOOTING

The table includes some of the most common problems, their causes and remedies
PROBLEM
The battery is not installed correctly.
The ON/OFF switch is not on.
The device does
not work.
The battery is exhausted.
The battery is defective.
The device is defective.
NOTE: In the event of not being able to resolve the problem, get in touch with an Authorised
Service Centre.

TRANSPORTATION AND STORAGE

• Always store the product in a clean, safe, dry place with temperatures between 0º and 45ºC.
• The equipment is not weatherproof and should not be stored in direct sunlight, at high temperatures or in damp
places.
• The machine when not in use should be stored clean, on a flat surface.
• Store the machine out of the reach of children.

RECICLYING AND DISPOSING

When you decide to get rid of the machine, make sure to follow the local regulation.
Please help us to protect the environment and to preserve natural resources.
Get rid of the machine taking care of the environment. Do not simply throw it away in the domestic bin. Please
separate plastic and steel to recycle. Take this device to an authorised recycling centre. (Green point)
Petrol, used oil, oil/petrol mixtures, as well as objects stained with petrol (e.g.: cloths) must not be disposed of into the
domestic waste, pipes, soil, rivers, lakes or the sea. All objects stained with oil must be disposed of according to the
local regulations: take it to the most suitable recycling centre.
Package materials are recyclables. Please, throw them away on the appropriate rubbish bin.
POSSIBLE CAUSE SOLUTION
Put the battery in place.
Make sure the machine is turned on.
Charge the battery.
Contact the after-sales service.