Installation & Use; Care & Maintenance - VENOM VS5001 Benutzerhandbuch

ENGLISH
Twin Docking Station
For use with PS5
Model number: VS5001/VS5007/VS5010
User Guide
Contents:
1 x Twin Docking Station
2 x USB Type C Charging Dongles
1 x USB to USB Type C Charging Cable
Installation & Use
1. Carefully insert the USB Type C Charging Dongle into the
USB Type C port on the top of your DUALSENSE wireless
controller, ensuring it pushes fully into place.
2. Insert the USB connector from your Twin Docking Station
into any spare port on your PlayStation® 5 system.
3. Insert your DUALSENSE wireless controller, facing forward,
into the Twin Docking Station ensuring it clicks into place.
4. Then turn on your PlayStation® 5 system.
5. When charging, the LED light will glow red, once fully
charged it will glow blue.
6. Once fully charged you can remove your DUALSENSE
wireless controller from the Twin Docking Station.
To charge your DUALSENSE Wireless Controllers whilst your
PS5 system is in Standby Mode
1. From the PS5 home screen select "Settings".
2. Then select "Power Saving Setting" followed by "Set
Functions Available for Standby Mode".
3. Finally select "Supply Power from USB Ports" and ensure it is
ticked.
4. You can now charge your DUALSENSE Wireless Controllers
with your Twin Docking Station whist in Standby Mode.
Care & Maintenance
Your device is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will
help you to protect your warranty coverage:
• Keep your device out of the reach of small children.
• Keep the device dry. Precipitation, humidity and all types
of liquid or moisture can contain minerals that will corrode
electronic circuits. If your device does get wet, allow it to dry
completely.
• Do not use or store the device in dusty, dirty areas, as moving
parts and electronic components of your device can be
damaged.
• Do not use or store the device in hot areas. High
temperatures can shorten the life of electronic devices,
damage batteries and warp or melt certain plastics.
• Do not use or store the device in cold areas. When the device
returns to its normal temperature, moisture can form inside
the device and damage electronic circuit boards.
• Do not drop, knock or shake the device. Rough handling can
break internal circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents or strong
detergents to clean the device. All of the previous
suggestions apply equally to your device, battery, charger or
any enhancements.