Werbung
Installation
1 Attach the TEMPLATE on the CEILING BOARD and drill a guided hole.
2 After checking the hole size to use, remove the cap and the hex nut.
CABLE HOLE CAP
• Mounting combination table
When mounting camera to the housing, refer to the mounting combination table shown
below:
- A/B/C/D : mounting bracket assembly hole
- / / / / : camera assembly hole
- 1/2/3 : case top number
A-
- 1
B -
- 1
B -
- 2
B-
- 3
B-
- 1
PND-9080R
QNV-6072R
QND-8080R
XNV-6010
HCV-6070R
XND-6080
QNV-6082R
XNV-6020R
HCV-6080R
XND-6080R
QNV-8080R
XNV-8020R
HCV-6080R
XND-6080RV QNV-6070R
XNV-8030R
HCV-6080RSD HCD-7080R
XND-6080V
QNV-6071R
XNV-8040R
HCV-7070R
XND-8080R
QNV-7080R
HCV-7070RA QND-6070R
XND-8080RV QNV-7081R
HCV-7080R
XND-L6080R LNV-6071R
HCV-7080RVP QND-7080R
XND-L6080RV LNV-6070R
XND-L6080V LNV-6072R
XNP-6040H
M
`
For more information on the mounting combination, check online using the QR code
on the product.
3
Use a Phillips head screwdriver to join the camera mounting bracket to the housing.
CAMERA MOUNT BRACKET
M
`
When joining the camera mounting bracket, refer to the mounting combination table
for the proper mounting hole of the housing.
4 Fix the ANCHOR BOLT onto the concrete CEILING, and secure the SAFETY WIRE to the
ANCHOR BOLT as below:
HEX NUT
1.
Tighten the NUT ("N1") on the ANCHOR BOLT.
2.
Insert the provided SAFETY BRACKET into the ANCHOR BOLT.
3.
Tighten two NUTs ("N2", " N3") onto the ANCHOR BOLT.
4.
Hook and fix one end of the SAFETY WIRE onto the SAFETY BRACKET.
5.
Hook and fix the other end of SAFETY WIRE onto the HOUSING as shown below:
ANCHOR BOLT
CEILING
I
`
The ANCHOR BOLTs and nuts are optional and not included in the product package.
C-
- 2
D -
- 3
`
ANCHOR BOLTS must be able to sustain the weight of at least 30 kg.
HCD-6080R
HCV-7010R
HCV-7010RA
`
If you proceed without following the instructions in the manual, that is if you work with the
HCD-7070R
HCV-7020R
HCV-7020RA
camera body already attached from the beginning, the safety wire could exceed its limit and
be broken when the housing is accidentally dropped, which could result in an accident.
HCD-7070RA HCV-7030R
HCV-7030RA
LNV-6011R
LNV-6021R
5 Push the HOUSING inside the CEILING through the CEILING hole, and tighten the
SCREWs (x3) clockwise to fix the HOUSING on the CEILING.
LND-6071R
LNV-6031R
QNV-6010R
(Adjust the height of the bracket to secure the housing to the ceiling.)
QNV-6020R
QNV-6030R
QND-6071R
QNV-7010R
QNV-7020R
QNV-7030R
LNV-6010R
QND-7081R
LNV-6012R
LNV-6020R
LND-6070R
LNV-6022R
LNV-6030R
LND-6072R
LNV-6032R
QNV-6012R
BRACKET
QND-6072R
QNV-6022R
QNV-6032R
QND-6082R
QNV-8010R
QNV-8020R
QNV-8030R
I
`
Using a power tool for installation could cause product damage.
If you are going to use a power tool, the torque must be 30 Nm or less.
`
Ensure that the HOUSING is firmly secured to the CEILING BOARD.
HOUSING
HOUSING
Nut (N1)
ANCHOR BOLT
SAFETY BRACKET
Nut (N2,N3)
SAFETY WIRE
CEILING
HOUSING
BRACKET
CEILING
TR20
6
Use the provided machine screws to join the camera to the camera mounting bracket inside
the housing.
`
For HCD-6080R, HCD-7070R, HCD-7070RA, and HCD-7080R models, assemble them using the
screws provided as camera accessories.
CAMERA
MACHINE SCREW
M
`
When mounting the camera, refer to the mounting combination table to select the
mounting holes appropriate to the camera size.
CAMERA MOUNT
BRACKET
7
Attach the CASE TOP to the HOUSING, and tighten the 3 SCREWS on the COVER to fix it to
the HOUSING.
M
`
Refer to the mounting combination table to use the
case top appropriate to the dome cover size of the
camera.
To know the type of the case top, please check the
number marked inside.
8
Insert the SCREW CAPS into the screw holes.
SCREW CAP
CAMERA MOUNT BRACKET
CASE TOP
TR20
PT01-005738A
Werbung
