Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
user manual electronic lock Basic
1. General
1.1 Code
The lock operates with a numeric six-digit code. A secondary code can be added. Each pressed key is
confirmed with an audio and light signal.
After entry of a valid code a double signal follows. An invalid entry is followed by a long signal. After ten
seconds without entry, an already started entry is cancelled.
1.2 opening
Enter code (factory code 1-2-3-4-5-6) and unlock/open the door within three seconds. If the lock is not
unlocked within three seconds, the lock secures automatically.
1.3 Closing
Close the door and turn the handle fully to closing position. The lock is secured. Confirm if the lock is locked by
trying to turn the handle back in open-position.
1.4 Manipulation protection
The keypad is blocked for five minutes after entry of four consecutive invalid codes. During this period, the light
flashes every ten seconds and any key press causes a long signal. After expiration, entry of two more invalid
codes will restart the five minute blocking period.
1.5 Safety reference
All codes are to be securely stored. Do not use personal data, such as birthdays and telephone numbers as
your personal code. Change the factory code before you start using the safe!
12
Werbung
Inhaltsverzeichnis
