Bluetooth Mode; Wired Mode - Cooler Master CK721 Bedienungsanleitung

IMPORTANT
Please charge your new keyboard for at least 2 hours before using for the first time.
Turning On Bluetooth for the First Time
A. USING BLUETOOTH - AN OVERVIEW
1. Toggle the physical switch on the side of the keyboard to enter Bluetooth Mode.
2. Press and hold FN + DEL/PGUP/PGDN for 5 seconds to enter pairing mode. The
indicator & DEL/PGUP/PGDN key will rapidly flash BLUE 3 times one every second to
confirm you are in Pairing Mode.
3. If pairing is successful, the indicator & DEL/PGUP/PGDN key will light up with a
solid GREEN light for 3 seconds. If unsuccessful, the keyboard will enter Sleep Mode
after 30 seconds. In Sleep Mode, all the keyboard lighting will be turned off.
Turning On Bluetooth After the First Time
1. When the Bluetooth mode is activated, the keyboard will connect to the previous
synced wireless device (DEL/PGUP/PGDN) automatically within seconds.
2. If successfully connected, the indicator & DEL/PGUP/PGDN key will light up with a
solid GREEN light for 3 seconds. If unsuccessful, the keyboard will enter Sleep Mode
after 30 seconds. In Sleep Mode, all the keyboard lighting will be turned off.
3. To connect to a specific paired device, press FN + DEL/PGUP/PGDN after activating
Bluetooth mode to connect to the corresponding device. The keyboard will connect
to the device if successful and enter sleep mode after 30 seconds if device is not
found or fails to connect.
B. MANUALLY PAIRING DEVICES
1. Toggle the physical switch on the side of the keyboard to enter Bluetooth Mode.
TO THE KEYBOARD
2. Press and hold FN + DEL/PGUP/PGDN for 5 seconds to enter pairing mode. The
indicator & DEL/PGUP/PGDN key will rapidly flash BLUE 3 times one every second to
confirm you are in Pairing Mode.
3. If pairing is successful, the indicator & DEL/PGUP/PGDN key will light up with a
solid GREEN light for 3 seconds. If unsuccessful, the keyboard will enter Sleep Mode
after 30 seconds. In Sleep Mode, all the keyboard lighting will be turned off.
C. SWITCH PAIRED DEVICES
1. Press FN + DEL/PGUP/PGDN to switch to the corresponding paired device.
A. USING 2.4 GHZ - AN OVERVIEW
1. Toggle the physical switch on the side of the keyboard to enter 2.4 GHz
Mode. The indicator & Enter key will continuously flash a BLUE light one
every second to confirm it is trying to connect to a device.
2. Plug the included dongle into the desired device. The keyboard
should automatically connect to the device.
3. If successfully connected, the indicator & Enter key will light up with
a solid GREEN light for 3 seconds. If unsuccessful, the keyboard will
enter Sleep Mode after 30 seconds. In Sleep Mode, all the keyboard
lighting will be turned off.
4. To pair with other devices, simply unplug the dongle and re-plug
into another device. If pairing is successful, the indicator & Enter key
will light up with a solid GREEN light for 3 seconds. If unsuccessful, the
keyboard will enter Sleep Mode after 30 seconds. In Sleep Mode, all
the keyboard lighting will be turned off.
1. Toggle the physical switch on the side of the keyboard to enter 2.4 GHz Mode.
B. MANUALLY PAIRING 2.4 GHZ DONGLE Press and hold FN + Enter for 5 seconds to enter pairing mode. The indicator &
TO THE KEYBOARD Enter key will rapidly flash BLUE 3 times one every second to confirm you are in
Pairing Mode.
2. Plug the included dongle into the desired device. The keyboard should
automatically connect to the device.
3. If pairing is successful, the indicator & Enter key will light up with a solid
GREEN light for 3 seconds. If unsuccessful, the keyboard will enter Sleep Mode
after 30 seconds. In Sleep Mode, all the keyboard lighting will be turned off.

BLUETOOTH MODE

2.4 GHz MODE
If the physical switch is toggled to Bluetooth or 2.4 GHz Mode
SWITCHING TO WIRED MODE
The keyboard will switch to Wired Mode automatically as the physical
switch is toggled to Wired and it is connected to a PC or laptop.
If the physical switch is toggled to Wired Mode
The keyboard will switch to Wired Mode automatically as it is connected
to a PC or laptop.
CHARGING THE KEYBOARD
If the physical switch is toggled to Bluetooth or 2.4 GHz Mode
The keyboard will remain connected to the wireless device and begin charging
when it is plugged into a PC, laptop, or power source. When charging, the
indicator light will be RED and the keyboard will light up with RED BREATHING
five times then switch back to lighting mode.
When the battery level is full, the indicator light will change to GREEN and the
keyboard will light up with GREEN BREATHING five times.
If the physical switch is toggled to Wired Mode
The keyboard will begin charging when it is plugged into a PC, laptop, or
power source. When charging, the indicator light will be RED and the
keyboard will light up with RED BREATHING five times then switch back
to lighting mode.
When the battery level is full, the indicator light will change to GREEN for
3 seconds then turn off and the keyboard will light up with GREEN
BREATHING five times.
A. CAPSLK Indicator
The CAPSLK indicator will light up with a solid WHITE light when turn on
CAPSLK key, and turn off when turn off CAPLSK key.
B. Wireless Mode
1. In Pairing Mode, the indicator & DEL/PGUP/PGDN key will rapidly flash
BLUE 3 times one every second.
2. In Connecting Mode, the indicator & DEL/PGUP/PGDN key will
continuously flash a BLUE light one every second.
3. If Pairing / Connecting is successful, the indicator & DEL/PGUP/PGDN
key will light up with a solid GREEN light for 3 seconds.
1. When the battery level falls below 15%, the keyboard will enter Low Power
C. Low Battery Scenario
Mode and the keyboard backlight will be turned off. The indicator will
repeatedly flash RED light 3 times every 20 seconds until the keyboard enter
Sleep Mode or is connected to the PC, laptop or power source.
*The Low Power Mode percentage can be customized via Cooler Master
software.
2. When the battery level falls below 5%, the keyboard will go into Deep
Sleep Mode. All lighting will be turned off - including the indicator.
D. Indicator on DEL/PGUP/PGDN
Press FN will show the pairing status of each location (DEL, PGUP or
PGDN) with WHITE light.

WIRED MODE

CHARGING
INDICATOR LIGHT RULE