Instruction Manual; General Safety Instructions; Overview Of The Components; English - AEG TT 4471 USB Bedienungsanleitung, Garantie

All manuals and user guides at all-guides.com

Instruction Manual

Thank you for choosing our product. We hope you enjoy
using the device.
Symbols in these Instructions for Use
Important information for your safety is specially marked. It is
essential to comply with these instructions in order to avoid
accidents and prevent damage to the machine:
WARNING:
This warns you of dangers to your health and indicates
possible injury risks.
CAUTION:
This refers to possible hazards to the machine or other
objects.
NOTE: This highlights tips and information.

General Safety Instructions

Read the operating instructions carefully before putting the
appliance into operation and keep the instructions including
the warranty, the receipt and, if possible, the box with the
internal packing. If you give this device to other people,
please also pass on the operating instructions.
• To avoid the risk of fire or electric shock, you should not
expose the device to rain or humidity. Do not use the
device near water (e.g. bathroom, swimming pool, humid
cellars).
• Do not use the unit in extremely hot, cold, dusty, or damp
places.
• Do not expose the appliance to direct sunlight, high
temperatures, moisture or excessive vibrations.
• The unit is designed solely for private use and its intend-
ed purpose. This unit is not designed for commercial use.
• Make sure that the power cable is not bent, pinched, or
comes into contact with heat sources.
• Make sure that the power cable is not a tripping hazard.
• The power supply unit is only suitable for use in dry
rooms.
• Never touch the power supply unit or the cable with wet
hands.
• Only connect the power supply unit to a properly installed
wall outlet. Ensure that the listed voltage matches the
voltage of the wall outlet. Also ensure that the output
current, voltage and the polarity of the power supply unit
match the information on the connected device.
• The power cord must always be easily accessible.
• Avoid covering the device' s vent openings.
• Never cover the vent holes with objects, such as maga-
zines, tablecloths, curtains etc.
TT4471USB_IM_new
• This appliance shall not be exposed to dripping or
splashing water and that no object filled with liquids such
as vases shall be placed on apparatus.
• Open sources of fire, such as e.g. burning candles may
not be placed onto the unit.
• Never open the device' s case. Improper repairs can cause
severe danger to the user. If the device or particularly the
power cord is damaged, don't use the device any further
and have it repaired by a qualified specialist. Check the
power cord regularly for damage.
• Pull the power plug from the socket if the device will be
out of use for long periods.
• Disconnect the unit from the power supply for cleaning or
if a fault occurs.
These symbols may be found on the machine and are
intended to indicate the following:
The lightning symbol should advise the user of
parts in the inside of the device which carry dan-
gerously high voltage levels.
The symbol with an exclamation mark should
advise the user of important operation or mainte-
nance instructions in the accompanying documen-
tation.
Children and Frail Individuals
• In order to ensure your children' s safety, please keep all
packaging (plastic bags, boxes, polystyrene etc.) out of
their reach.
WARNING:
Do not allow small children to play with the foil. There is
a danger of suffocation!
• This device is not intended to be used by individuals
(including children) who have restricted physical, sensory
or mental abilities and / or insufficient knowledge and/or
experience, unless they are supervised by an individual
who is responsible for their safety or have received
instructions on how to use the device.
• Children should be supervised at all times in order to
ensure that they do not play with the device.

Overview of the Components

1 Locking screw (transportation safety lock)
2 Tone arm lever
3 Tone arm support / lock
4 33 RPM / 45 RPM rotation speed selector
5 PITCH CONTROL adjustment (rotation speed fine tuning)
6 Guide lever
7 START / STOP switch
8 Stroboscopic lamp
9 Stroboscopic mirror
10 Central axis
11 Turntable
12 Ground connection

English

25
18.05.17