Assemble Montieren Step 1 Install the gantry | Schritt 1 Installieren Sie das Portal Note: To avoid bending the lead screw and effect the printing model, don't touch or twist the lead screw when take out the gantry from the package. Tipp: Um ein Verbiegen der Leitspindel und eine Beeinträchtigung des Druckmodells zu vermeiden, berühren oder verdrehen Sie die Leitspindel nicht, wenn Sie die Gantry aus der Verpackung nehmen.
Seite 5
Step 2 Install the fixing plate screw Schritt 2 Installieren Sie die Befestigungsplattenschraube M5*10 (6 pcs) | M5*10 (6 Stck) M5*8 (2 pcs) | M5*8 (2 Stck) Step 3 Install the Filament Holder Schritt 3 Installieren Sie den Filamenthalter The filament holder can be installed left and right Der Filamenthalter kann links und rechts installiert werden...
Seite 6
Step 4 Cable connecting Schritt 4 Cable connecting M3*8(2pcs) M3*8 (2Stck) Hotbed cable | Hotbed-Kabel Z Motor cable| Z-Motor Kabel Arranging Wire | Draht arrangieren Filament detector | Filamentdetektor Note: If you find there is a little shaking on extruder,bed or X-axis, don't worry, this is caused by long-term transportation. Please refer to the adjustment video link in the SD card to adjust, it is helpful.
Auto-leveling Automatische Nivellierung The printer will start auto-leveling Plug in the cable and turn on the Click “Leveling” on main interface after preheat. power Stecken Sie das Kabel ein und Klicken Sie auf der Hauptoberfläche schalten Sie das Gerät ein auf „Nivellieren“.
Preheat Vorheizen Click “preheat” on the main According to your filament, select interface appropriate settings Wählen Sie entsprechend Ihrem Klicken Sie auf der Filament geeignete Einstellungen aus Hauptschnittstelle auf „Vorheizen“. Note: The UI information is only for refernece, the actyal UI may be different . Hinweis: Die Informationen zur Benutzeroberfläche dienen nur als Referenz.
Insert the filament Legen Sie das Filament ein In order to feed filament smoothly, Click “load” to feed the Insert SD card Please keep the end of the filament filament until the filament is at 45°. out of nozzle. Legen Sie die SD-Karte ein Um das Filament reibungslos Klicken Sie auf „Laden“, um das zuzuführen, halten Sie das Ende...
Printing Drucken Select a gcode file to print Wählen Sie eine zu druckende Gcode-Datei aus Note: The UI information is only for refernece, the actyal UI may be different . Hinweis: Die Informationen zur Benutzeroberfläche dienen nur als Referenz. Die tatsächliche Benutzeroberfläche kann unterschiedlich sein.
Z-offset adjust Z-Offset-Einstellung When you start your first printing,adjust the Babystep value according to the adhesion of the filament and the glass platform. Click “Save” to save your setting, and you don’t need to adjust the value again next time. Wenn Sie Ihren ersten Druck starten, passen Sie den Babystep-Wert entsprechend der Haftung des Filaments und der Glasplattform an.
Software Instructions Softwareanweisungen Magician Pro works with a variety of slicing software, such as Magician Pro funktioniert mit einer Vielzahl von Slicing-Software, Cura, Simplify 3D, Repetier-Host, and more. We will introduce wie Cura, Simplify 3D, Repetier-Host und mehr. Wir stellen CURA_xx.xx in detail, and you will learn how to set the slicing...
Seite 13
Click Add printer Choose Custom[Custom FFF printer ], insert Printer name for example Magician Pro,and Click Add Klicken Sie auf Drucker hinzufügen Wählen Sie Custom[Custom FFF printer ], geben Sie den Druckernamen ein, z. B. Magician Pro, und klicken Sie auf Hinzufügen...
Seite 14
Insert print size, X400 Y400 Z400, select Heated bed Click Extruder 1, nozzle size 0.4mm, Compatible material diameter 1.75mm, Click next Druckgröße X400 Y400 Z400 einfügen, Beheiztes Bett Klicken Sie auf Extruder 1, Düsengröße 0,4 mm, Kompatibler auswählen Materialdurchmesser 1,75 mm, Klicken Sie auf Weiter...
Seite 15
Step 2 Import Configuration file Click Preferences, Configure Cura… Schritt 2 Konfigurationsdatei importieren Klicken Sie auf Einstellungen, Cura konfigurieren…...
Seite 16
Choose Click Profiles, Import, PLA+.curaprofile in SD card Klicken Sie auf Profile, Importieren, Wählen Sie PLA + .curaprofile auf der SD-Karte...
Seite 17
After Import the profile, you will see it below, On the right side you can see PLA+ active choose PLA+, and click Activate Nach dem Importieren des Profils wird es unten Auf der rechten Seite sehen Sie PLA + aktiv angezeigt.
Seite 18
Step 3 Slicing Click here, you can check all the parameter, when you move mouse Click load button you can load a stl file, you can move, on it will show the explanation to help you under more clearly rotate, and Zoom the model. Click Slice button. Schritt 3 Schneiden Klicken Sie hier, Sie können alle Parameter überprüfen, wenn Klicken Sie auf die Schaltfläche Laden, um eine STL-Datei zu...
Seite 19
1.After slice completed, you can see the time and weight of material that the printing will take; 2.We suggest you click PREVIEW to check, you can choose line Type and Drag the slider on the right side to see the printing process clearly. After that , you can save it in your SD card to print it out by the printer.
Seite 20
Or you can visit our Facebook group at https://www.facebook.com/groups/1018823731846578 Detaillierte Garantiebestimmungen finden Sie unter http://www.3dmingda.com/single/request_after_sales_service.html Für Unterstützung besuchen Sie bitte unseren Youtube-Kanal https://www.youtube.com/channel/UC6PO64H7CfQtBy4H-fSRM4A?view_as=subscriber Oder besuchen Sie unsere Facebook-Gruppe unter https://www.facebook.com/groups/1018823731846578 Shenzhen MINGDA Technology Co.,LTD Email: info@3dmingda.com www.3dmingda.com Support request Youtube Channel Facebook Page Official website Unterstützungsanfrage...