Scope Of Delivery; System Requirements - Ultron UCR3 75in1 Handbuch

UCR3 75in1
Card Reader intern
Specifications:
– Multi-format card reader
– Connection via internal USB 3.0 interface
– Supports all common memory card types CF / XD / XD H Type / XD M TYPE / CFI / CF II / Ultra II CF / Extreme CF / Extreme III CF / MD / SD /
SDHC / SDXC / Micro SD / Micro SDHC / Trans(T)-FLASH/ Extreme SD / Extreme III SD / Ultra II SD / MMC I / MMC II / MMC 4.0 / Ultra MMC /
MS / MS Pro / MS-Duo / MS Pro Duo / Extreme MS Pro / Extreme III MS Pro / HS MS-MG Pro Duo / MS-MagicGate / MS-MG-Pro / MS-MG-Duo /
MS-MG Pro-Duo / MS-ROM / HS MS / MG Pro / Ultra II MS,
with adapter: Mini SD / MMC Micro / RS-MMC / HS RS MMC / M 2
– External USB 3.0 access
– 70 cm connecting cable

Scope of Delivery:

– UCR3 75-in-1 Card Reader
– Manual
– Fixing bolt

System Requirements:

– Intel Pentium or compatible computer
– 1 free USB3 port on the motherboard
– 1 free 3.5" bay
– Windows 2000 (SP4+), XP 32/64-bit (SP1+), Vista 32/64-bit, Windows 7 32/64-bit, Windows 8 32/64-bit, Mac OS X, Linux (Kernel 2.4.1+)
Hardware Installation:
– Please remove both side panels from the case
– Remove a 3.5" panel from the front panel
– Carefully put the card reader into the 3.5" bay until it is flush with the front of the case
– Now screw the card reader tight on both sides.
– Connect the cables for the card reader to your motherboard.
Please refer to the manual of your motherboard to find out where the plug is to be connected.
The manual for your case tells you how to remove the side panels and the 3.5" front panel.
36 Monate Herstellergarantie | 36 months manufacturers warranty | 36 mois de garantie du fabricant
please delete, because
this product not
support this OS。
add: and later OS