Clas Ohlson SP-G125WTDW03-02B Anleitung

LED Disco Light
Art.no 36-7797 Model SP-G125WTDW03-02B
Please read the entire instruction manual before using the pro-
duct and then save it for future reference. We reserve the right for
any errors in text or images and any necessary changes made to
technical data. In the event of technical problems or other que-
ries, please contact our Customer Services (see address details
on the back).
Safety
This product is intended for indoor use only.
Warning: Keep all packaging material away from
children to prevent the risk of asphyxiation.
• The product may be used by children aged 8
years and above and by persons with reduced
physical, sensory or mental capability or lack of
experience and knowledge provided they have
been given supervision or instruction concerning
use of the product in a safe way and understand
the hazards involved.
• Never let children play with the product.
• Cleaning and maintenance may be carried out by
children but only under adult supervision.
• Some people may experience discomfort (in
certain cases epileptic seizures) when exposed
to certain light patterns. Seek immediate medical
attention in the event of an epileptic seizure.
• The product must only be connected to a 100–
240 V AC electrical socket.
• The product must always be placed on a dry, level
surface capable of supporting its weight.
• Make sure that your hands are completely dry
and hold the mains adapter when plugging in or
unplugging the product from the wall socket. Do
not pull on the mains lead.
• In order for the product to be completely isolated
from the mains, the mains adapter must be
unplugged from the wall socket.
• Never look directly at the light source.
UNITED KINGDOM • customer service tel: 020 8247 9300 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.co.uk
postal Clas Ohlson Ltd, Aquilla House (First floor), 1 Becketts Wharf, Lower Teddington Road, Hampton Wick, Kingston Upon Thames, KT1 4ER
• The LED light source cannot be replaced. When
the product ceases to operate it is to be discarded.
• Make sure that the power outlet used is easily
accessible in case the product needs to be
unplugged quickly.
• Never lay the mains lead with the inline on/
off switch over hot surfaces, sharp edges or
corners. Run the mains lead in such a way that
there is no risk of anyone tripping over it.
• Never use the product if the mains adapter is
damaged. Never use the product if it is defective
or damaged in any way, has been dropped or if
any water or other liquid has entered the housing.
• The product may only be used with the supplied
mains adapter and on/off switch.
• The supplied mains adapter and on/off switch
must never be used for another product.
• Never expose the product to water or other liquids.
• Never try to open the housing, repair or modify
the product in any way.
• All repairs must be carried out by qualified
service technicians using original spare parts.
Product description
1. Disco light diffuser
2. On/off switch
3. Mains adapter
2 1
3
Placement
Switching on/off
1. Plug the mains lead into the input socket on the disco light.
2. Plug the mains adapter into an electrical outlet.
3. Switch the light on using the inline on/off switch on the
mains lead.
Unplug the mains adapter to completely
disconnect the disco light from the
electricity network.
Care and maintenance
• Unplug the mains adapter from the wall socket before
wiping the disco light clean using a dry cloth.
• Store the product in a dry, dust-free environment out of
children's reach whenever it is not to be used for a long time.
Responsible disposal
This symbol indicates that the product should not
be disposed of with general household waste.
This applies throughout the entire EU. In order to
prevent any harm to the environment or health
hazards caused by incorrect waste disposal, the
product must be handed in for recycling so that
the material can be disposed of in a responsible
manner. When recycling your product, take it to
your local collection facility or contact the place
of purchase. They will ensure that the product is
disposed of in an environmentally sound manner.
Specifications
Mains adapter:
Input 100–240 V AC 50/60 Hz, Max 0.07 A
Output 12 V DC, 0.25 A, 3 W
Length of cable 150 cm
Class ll product.
Disco light:
LEDs 3 x 1 W (not replaceable), red, green, blue
Dimensions 12.5 x 15.5 cm
Class III product.