Trevi EM 408 R Bedienungsanleitung Seite 16

arrow on the cabinet.
2 Insert 2 batteries 1.5V (type "AA") and close the battery compartment
Transmitter battery compartment:
1 Unlock the battery compartment(11) by sliding it down.
2 Insert 2 batteries 1.5V (type "AA"), reposition and close the the battery compartment.
ON/OFF
Receiver
1 Before switching ON the transmitter and receiver, connect the receiver's jack 6.3mm
(4) to the microphone jack of a mixer, amplifier, HiFi system or other amplified spea-
kers;
2 Screw the antenna (1) to the body of the receiver;
3 Set the ON/OFF switch (2) to ON position, the Power LED indicator (3) will light up.
Transmitter
1 Insert and screw the 3.5mm jack of the clip or clip microphone microphone to the
socket (9);
2 Set the POWER ON/OFF/MUTE switch (8) to the ON position, the Led indicator (7)
will light up;
The transmitter has a 3-position selector switch:
- ON = Microphone on
- MUTE = Exclude audio
- OFF = Microphone off
All manuals and user guides at all-guides.com
13