Temperature Selection; Digital-Display - De Dietrich DLZ1814I Bedienungsanleitung

TEMPERATURE SELECTION

button
This button allows you to change the

temperature of the wash cycles.
 It is not possible to raise the temperature
over the maximum allowed for the
programme, in order to protect the fabrics.
If you want carry out a cold wash all the

indicators must be off.
SPIN SELECTION button
By pressing this button, it is possible to

reduce the maximum speed, and if you
wish, the spin cycle can be cancelled.
If the label does not indicate specific

information, it is possible to use the
maximum spin expected in the program.
To prevent damage to the fabrics, it is
not possible to increase the speed
over the maximum allowed for the
programme.
To reactivate the spin cycle press the

button until you reach the spin speed you
would like to set.
 It is possible to modify the spin speed
without pausing the machine.
An over dosing of detergent can cause
excessive foaming. If the appliance
detects the presence of excessive foam,
it may exclude the spinning phase or
extend the duration of the program
and increase water consumption.
The machine is fitted with a special
electronic device, which prevents the
spin cycle should
unbalanced. This reduces the noise
and vibration in the machine and so
prolongs the life of your machine.
the load be
74
NIGHT & DAY button
This option reduces the intermediate spin

speed to 400 rpm, where applicable, increase
the water level during rinsing and keep
the laundry immersed in water after the
final rinse, in order to spread the fiber perfectly.
During the phase in which the water is

held in the tub, the relevant indicator light blink
to show that the machine is at a standstill.
Deselect the option to end the cycle with

a spin dry (which may be reduced or
cancelled using the appropriate button)
and emptying phase.
Thanks to electronic control, the water in

the intermediate phases is
silently, making this option very useful for
washing at night.
KEY LOCK
Pressing simultaneously

TEMPERATURE SELECTION and SPIN
SELECTION for about 3 seconds, the
machine allows you to lock the keys. In
this way, you can avoid making accidental
or unwanted changes if a button on the
display is pressed accidently during a cycle.
The key lock can be simply cancelled by

pressing the two buttons simultaneously
again or turning off the appliance.
Digital Display
The display's indicator system allows you to
be constantly informed about the status of
the machine.
1) DOOR LOCKED INDICATOR LIGHT
The indicator light is illuminated when the

door is fully closed.
emptied
the buttons