Herunterladen Diese Seite drucken

Audio System SUBFRAME R10 FLAT EVO 2 Anleitung

Werbung

SUBFRAME R10 FLAT
SUBFRAME R10 FLAT-2
SUBFRAME R10 FLAT
Vielen Dank!
Wir beglückwünschen Sie zum Erwerb eines hochwertigen
AUDIO SYSTEM Produktes inklusive GERMAN SOUND.
Wichtig: Lesen Sie diese Bedienungsanleitung vor der Installation
und Inbetriebnahme des Gerätes vollständig durch.
Achtung: Beachten Sie die Vorschriften und Hinweise Ihres
Automobilherstellers und achten Sie beim Anschließen auf die
richtige Polarität. Wichtig: Ihr Kaufbeleg dient als Garantienachweis
für etwaige Reparaturen oder Austausch. Heben Sie Ihren Kaufbeleg,
diese Bedienungsanleitung und die Originalverpackung sorgfältig auf.
Achtung: Der Gebrauch von Musikanlagen kann das Hören von
wichtigen Verkehrsgeräuschen behindern.
AUDIO SYSTEM GERMANY übernimmt keine Verantwortung
für Gehörschäden, körperliche Schäden oder Sachschäden, die aus
dem Gebrauch oder Missbrauch seiner Produkte entstehen. Wir
empfehlen Ihnen, die Installation von einer Fachwerkstatt /
Einbauspezialist vornehmen zu lassen, da ein fachgerechter Einbau
und Anschluss die Voraussetzung für ein klanglich perfektes
Ergebnis ist.
Montage Tipps
WARNUNG: Trennen Sie vor der Montage den Masse-Pol (-) von der
Fahrzeugbatterie. Kontrollieren Sie alle Anschlüsse auf richtige
Polung, dies kann sonst zu Kurzschlüssen an der Fahrzeugelektrik
führen. Die besten Einbaupositionen sind die Originalplätze zwecks
Originalität und einfacherer Montage. Beachten Sie, dass die
Lautsprecher plan und stabil eingebaut werden. Die Qualität des
Einbaues entscheidet sehr stark das Klangbild, daher sollte auf
Dämmung und Sorgfalt bei der Installation geachtet werden.
Beachten Sie, dass die Lautsprecher vor Hitze, Sonneneinstrahlung,
mechanischen Einflüssen, Feuchtigkeit und Nässe durch Zubehör
von AUDIO SYSTEM geschützt sind.
ACHTUNG: Verlegen Sie Ihre Kabel so, dass diese nicht gequetscht
werden oder über scharfe Kanten verlaufen. Dies kann zu
Kurzschlüssen mit Beschädigungen führen.
Vorsicht: Beim Entfernen von Innenverkleidungen können
Befestigungsteile aus Plastik beschädigt werden und müssen ersetzt
werden. Wichtig: Die richtige Polarität des Subwoofers zum
Tief/Mitteltöner kann man durch Verpolen herausfinden.
Ausprobieren und hören bzw. messen ist hier sinnvoll!
audio system germany - falltorstrasse 6 - 76707 hambrücken
/ SUBFRAME R10 FLAT ACTIVE
EVO 2
/ SUBFRAME R10 FLAT ACTIVE-2
EVO 2
ANLEITUNG / USER MANUAL
EVO 2
audio-system
www.
Thank you!
Congratulations on purchasing a high-quality
AUDIO SYSTEM product incl. GERMAN SOUND.
Important: Completely read this operating instruction before
installation and use of the device.
Attention: Pay attention to advice and instructions of the car
manufacturer. Check the polarity when connecting the speakers.
Important: You will need your purchase receipt as proof of purchase
for all warranty repairs and for insurance purposes. Keep your
receipt, owner´s manual and packing materials in a safe location for
possible future use.
Attention: Use of sound components can impair your ability to hear
necessary traffic sounds and may constitute a hazard while driving
your automobile. AUDIO SYSTEM GERMANY accepts no
liability for hearing loss, bodily injury, or property damage because
of use or misuse of our products.
We recommend installing the equipment by an authorized service
center or dealer. A professional fitting and connection are the
requirement for further warranty and perfect sound.
Mechanical Installation Hints
Warning: First disconnect negative pole of your car battery. Check
polarity-changing polarity may cause serious damages to your car
electric. Best speaker positions are the original build in positions.
Easy installation and originality are the reasons.
Please note that the speakers are flat and stable. The quality of the
installation decides the sound very much, therefore, attention should
be paid to insulation and care during installation. Please note that the
speakers are protected from heat, sunlight, mechanical influences,
moisture and wetness by accessories from AUDIO SYSTEM.
Attention: Lay all cables as straight as possible without squashing or
laying them over sharp edges. Otherwise, this can cause short circuit
or damages to your whole installation.
Attention: Be careful removing original plastic parts of your car. The
fitting parts could be damaged and must be replaced.
Important: The right polarity of all speakers is extremely important
for the sound of your car audio system. We recommend changing
polarity of the subwoofer finding out the best possible sound. The
best is to listen or measure it with.
.de
EVO 2
EVO 2

Werbung

loading

Inhaltszusammenfassung für Audio System SUBFRAME R10 FLAT EVO 2

  • Seite 1 Important: The right polarity of all speakers is extremely important Befestigungsteile aus Plastik beschädigt werden und müssen ersetzt for the sound of your car audio system. We recommend changing werden. Wichtig: Die richtige Polarität des Subwoofers zum polarity of the subwoofer finding out the best possible sound. The Tief/Mitteltöner kann man durch Verpolen herausfinden.
  • Seite 2 Damping: DOORKIT 1.0 and DOORKIT 2.0 Z-(T)SC 0.75, 1.5, 2.5, 4.0 OFC-Kupfer-Lautsprecherkabel Z-(T)SC 0.75, 1.5, 2.5, 4.0 OFC-Speaker-Cable MBR165 / MBR 200 Spritzwasserschutz MBR165 / MBR 200 Splash Protection Rings audio-system www. audio system germany - falltorstrasse 6 - 76707 hambrücken...

Diese Anleitung auch für:

Subframe r10 flat active evo 2Subframe r10 flat-2 evo 2Subframe r10 flat active-2 evo 2