Herunterladen Diese Seite drucken

Audio System SUBFRAME M10 EVO Anleitung Seite 2

Werbung

M-SERIES
EVO
Sicherheitstipps
WARNUNG: Befestigen Sie den SUBFRAME mit den mitgeliefertem
SUBFRAME MONTING-KIT sicher im Fahrzeug!
ACHTUNG: Bitte lesen Sie diese Anleitung sorgfältig durch und beachten
Sie die Hinweise.
Technische Daten
EVO
SUBFRAME M10
Bassreflex/Vented Box mit/with M10
Leistung/Power: 400/300 Watt
Impedanz/Impedance: 4 Ohm
Maße/Size: 580/550mm / 200mm
Gewicht/Weight: 15,6 Kg
Gehäuse-Volumen/Volume: 30 Liter
SUBFRAME M10 ACTIVE
Bassreflex/Vented Box mit/with M10
und/and M-400.1 MD oder/or CO-220.1
Leistung/Power: 300 oder/or 150 Watt
Impedanz/Impedance: 4 Ohm
Maße/Size: 580/550mm / 200mm
Gewicht/Weight: 16,2 Kg
Gehäuse-Volumen/Volume: 30 Liter
Anschluß (ACTIVE)
Achtung: Für die Version ACTIVE lesen Sie bitte die
Bedienungsanleitung der M-400.1 MD oder CO-220.1
aufmerksam durch und folgen Sie den Anweisungen.
Anschluß (nicht ACTIVE)
Wenn sie einen separaten Verstärker verwenden,
schließen Sie diesen an das vorhandene Terminal
an. Bitte beachten Sie die Polarität.
Packungsinhalt
-
SUBFRAME MOUNTING KIT
-
bei Active: M-400.1 MD oder CO-220.1 inklusive
Kabelsatz
-
Bedienungsanleitung
Optionales Einbauzubehör
-
ALUBUTYL 1500, 2000 EVO, 3000 EVO, ALU 250
-
Dämmung: DOORKIT 1.0 und DOORKIT 2.0
-
Z-(T)SC 0.75, 1.5, 2.5, 4.0 OFC-Kupfer-Lautsprecherkabel
-
MBR165 / MBR 200 Spritzwasserschutz
audio system germany - falltorstrasse 6 - 76707 hambrücken
Anleitung / Manual
EVO
EVO
EVO
EVO
audio-system
www.
Safety Tips
WARNING: Fasten the SUBFRAME securely in the vehicle with the
SUBFRAME MOUNTING KIT supplied!
ATTENTION: Please read this manual carefully and follow the instructions.
Specifications
SUBFRAME M10-2
Bassreflex/Vented Box mit/with 2x M10
Leistung/Power: 800/600 Watt
Impedanz/Impedance: 2 Ohm
Maße/Size: 580/550mm / 200mm
Gewicht/Weight: 19,4 Kg
Gehäuse-Volumen/Volume: 30 Liter
SUBFRAME M10-2 ACTIVE
Bassreflex/Vented Box mit/with 2x M10
und/and M-400.1 MD oder/or CO-220.1
Leistung/Power: 400 oder/or 220 Watt
Impedanz/Impedance: 2 Ohm
Maße/Size: 580/550mm / 200mm
Gewicht/Weight: 20 Kg
Gehäuse-Volumen/Volume: 30 Liter
Connection (ACTIVE)
Attention: For ACTIVE version please read the manual of the M-
400.1 MD or CO-220.1 amplifiers carefully and follow the
instructions.
Connection (not ACTIVE)
If you are using a separate amplifier, connect it to the
existing terminal. Please note the polarity.
Package Content
-
SUBFRAME MOUNTING KIT
-
ACTIVE: M-400.1 MD or CO-220.1 including cable
set
-
Manual
Optional Mounting Accessories
-
ALUBUTYL 1500, 2000 EVO, 3000 EVO, ALU 250
-
Damping: DOORKIT 1.0 and DOORKIT 2.0
-
Z-(T)SC 0.75, 1.5, 2.5, 4.0 OFC-Speaker-Cable
-
MBR165 / MBR 200 Splash Protection Rings
.de
EVO
EVO
EVO
EVO
EVO

Werbung

loading

Diese Anleitung auch für:

Subframe m10 active evoSubframe m10-2 evoSubframe m10 active-2 evo