Bennett & Ross IDA-1 Skanderborg Bedienungsanleitung Seite 46

All manuals and user guides at all-guides.com
NOTE: Some playing devices can be controlled with the keys of the Internet
radio. Functions such as Play/Pause and forwarding to the next track or the
previous track are possible.
6. Disconnect by:
Turning the Bluetooth function off on the player,
Choosing a different playback mode,
Switching the Internet radio to standby,
Leaving the reception area,
Pressing the scrolling wheel until Speaker is disconnected is heard
NOTE:
If a code needs to be entered during the connection use „0000". Enter this
code on the player as well.
If playback is distorted it may be because the volume on the player is set
too high. Turn the volume on the player down and instead increase the
volume on the Internet radio.
It is possible that not all Bluetooth devices can be connected.
8.2 Operation via Bluetooth
NOTE: It is possible that not all devices support the operation via the Internet
radio's keys.
Key Assignment with the Keys of the Internet Radio
Playback: Automatic playback or start playback on the Bluetooth device.
Pause: Press the scrolling wheel shortly.
Playback after pause: Press the scrolling wheel shortly.
Next track: Press RIGHT
Previous track: Press LEFT two times
Back to the beginning of the track: Press LEFT
Accepting a Telephone Call
1. Should you receive a telephone call during playback, the sound
volume is automatically decreased and the phone rings.
2. Accept the call like you usually would. The sound will be played by
telephone.
3. End the call like you usually would. A few seconds afterwards the sound
on the Internet radio will come back.
Connecting a Different Device via Bluetooth
1. If you want to connect a different player via Bluetooth, you will first have
to disconnect the existing connection. Press the scrolling wheel until
you hear Speaker is disconnected
2. Connect the new device as described above. If successful you will hear
Connected.
2020-07-08 Bennett & Ross IDA-1 / ArtNr.: 00054829
IDA-1
.
17