How To Install; How To Use; How To Brake - Lionelo Whizz Bedienungsanleitung

10. Please get familiar with the manual supplied by the manufacturer.
11. Maximum permissible load is 100 kg (A class). The product is intended for
children above the age of 8.
12. The product is not intended for extreme sports.
13. Do not hold sharp items while riding.
14. When a child uses the scooter, please monitor riding at all times.
COMPONENT OF THE SET (FIG. 1)
A.
Shank with handlebars
B.
Platform with wheels
C.
2x Hex key

HOW TO INSTALL

1.
Insert the shank with handlebars into a dedicated hole (fig. 2).
2.
Tighten up screws (D in fig. 2) with the use of hex key supplied. Make sure
wheel and handlebars are properly positioned (fig. 3).
3.
Check fastening of the product. If bolts are stable, the scooter is ready for
use. If not, please tighten them up.

HOW TO USE

To start riding, put one foot on the platform, grab the handlebars with two palms
and choose riding direction. Push off from the surface with your second foot to
move. To change riding direction, gently turn handlebars as desired. Try your first
ride in the open space, devoid of obstacles.

HOW TO BRAKE

Press the rear mudguard with a left or right foot and simultaneously shift your
weight to the back. Adjust the center of gravity while stopping to avoid falling
down. Note! The mudguard may get very got – make sure you do not get burnt.
HOW TO REPLACE WHEELS AND MAINTAIN BEARINGS
If you can see that wheels are worn out, think about replacing them. Use the hex
key to unscrew the bolt which attaches the wheel to the scooter frame. Remove
the mounting mandrel and then wheel. If the technical condition of bearings is
good, keep them for another installation. To do so: remove bearings, clean them
EN ‑ 4 ‑