Operation Of The Hob; Start Cooking; Boost - ETNA AKI670-Serie Gebrauchsanweisung

OPERATION OF THE HOB

Please read the chapter 'Before first use' very carefully before you start cooking.
This prevents incorrect use of the hob.

Start cooking

1. Touch and hold the on/off key until you hear an audio signal.
▷ All displays light up; the induction hob is in standby mode.
The cooking zones and the extractor unit have power level zero.
▷
If the hob is not used for 20 seconds, it will shut off automatically.
2. Place a suitable pan on the cooking zone.
The cooking zone automatically detects the
▷
up more intensely.
As long as the display of the cooking zone lights up brightly, the cooking zone is
selected and the power level can be set.
3. When the response time has elapsed, or during cooking, you can activate the cooking zone
by manually selecting the display of the desired cooking zone.
4. Within 10 seconds, set the power level by touching the slide control.
The cooking zone starts at the level that has been set.
▷
▷ Set a higher or lower level with the slide control.
The extractor unit can be switched on manually or automatically. See 'Operating the
▷
extractor unit'.
▷ By default the automatic extraction mode is not active. When the automatic extraction
mode is active, the extractor unit switches on automatically with the necessary extraction
speed. Touch the key 'Automatic extraction mode' to activate the automatic extraction
mode.
After 10 seconds the slide control will switch off.
▷

Boost

You can use the boost function to cook for max. 5 minutes at the highest cooking level. You can
use the Boost function for a maximum of two cooking zones alongside each other at the same
time.
1. Touch power level P to select the Boost function.
'P' shows on the display.
▷
After the maximum boost time the cooking zone switches back to power level 9.
▷
pan; the display of this cooking zone lights
EN 13