Halemeier HA-Z4M-1 Bedienungsanleitung Seite 4

4-Mitter
4-channel Zigbee Transmitter
Typ: HA-Z4M-1
Teach-in – Connection
via Touchlink to another compatible device, e.g. Halemeier Zigbee Transmitter
First, the receiver is set to teach-in mode.
Zigbee receiver: Press Prog. button 4x
Teach-in with 4-channel receiver
Press and hold buttons a & b >3s
press and hold
The successful start is confirmed by a fast flashing of the red indicator LED. If the connection is successful, the red LED flashes 6
times. The successful connection is also confirmed by the flashing of the connected LED light
Factory reset – Remove all connections to start a new configuration
!!! All connections to devices and the connection to the network will be deleted!!!
Press buttons 1&2 3 times simultaneously to reset the remote control. This is acknowl-
edged by the indicator LED flashing 3 times
4
>3s
3x
Halemeier GmbH - Lange Straße 51 - D 49326 Melle Neuenkirchen - www.halemeier.de
m
c
4x
Teach-in with 1-channel receiver
Press + hold ON/OFF & channel button >3s
>3s
press and hold
3x
2x
21.04.2021
18.825.08 /