Technical Data; After-Sales Service And Self-Help - Gerus Gerutest NTB5 Bedienungsanleitung

5 Technical data

Max. pressure compressed air supply (p
Operating pressure (p
Working pressure (p
limited at:
Hydr. test pressure (p
Device circuit points:
screw in unit:
operating pressure:
socket wrench:
Weight:
empty:
Measurements:
height:
length:
width:
Tank capacity:
Performance and consumption of air:
0,53 m³/min for 6 bar compressed air

6 After-Sales service and self-help

If as described in point 2.1.13. operating pressure on indicator F is not steady but drops there is
leakage on the pump or pressure control valve B is not completely closed. This is normally caused
by wear of gaskets on the pump. Gaskets may be exchanged.
It is recommendable to have the pump overhauled by its manufacturer
GERUS APPARATEBAU GmbH & Co. KG,
Engelschalkstraße 16
D-86316 Friedberg
Tel.: 0049 – (0)821 - 588 662-0
FAX: 0049 – (0)821 - 588 662-10
E-Mail: info@gerus-apparatebau.de
bmax
):
B
):
A
):
test
Seite/ page 13 von/ of 13
): 15,0 bar
1,5 – 6,0 bar
800 bar (max. constant operating pressure)
800 bar (test operating)
(shipment)
compressed air connection
for nozzle nut appropriate to type of injection
nozzle
100 kg
1200 mm
600 mm
500 mm
10 l (dm³)
GERUS
ø
9 mm