Werbung
Warning
Electrical energy can cause serious
injuries. In order to avoid electrical
shock, injuries or fi re the following
safety instructions have to be
observed and respected:
• Please make sure that lead and housing are not dam-
aged. Lights and charging stations that have been
dropped or that are damaged, must be checked by
qualifi ed personnel before restarting operation.
• When laying the power supply lead, please make
sure that it does not come into contact with hot or
sharp parts and that it cannot be damaged in another
way. The lead is to be laid in such a way that it does
not constitute a risk of stumbling.
• The LED Pen Light must not be exposed to water or
other liquids.
Dangerous voltage discharge may occur.
• Service and repair work should be carried out by
qualifi ed technical personnel only. In order to ensure
the working reliability in the long term, always use
original spare parts.
• The LED Pen Light must not be disassembled. Inap-
propriate assembly can lead to a reduction of the
functionality, to fi re, to electrical shocks and/or to
injury.
• Do not remove any safety devices.
• Never look directly into the light, the light intensity is
strong enough to cause eye injuries.
• An extension cord must be suffi ciently dimensioned
using. Cables which are not appropriate for the
necessary amperage may overheat.
• While using the LED Pen Light slightly warm up
which does not reduce their functionality. When
working with the work light, appropriate caution is
required.
• Only use the LED Pen Light within the prescribed
places, and governed under the current regulations
relating to the working environment and to electrical
systems.
Sicherheits-Hinweise
The light intensity is strong enough to cause eye injuries.
For Your Safety
2
Safety Instructions
Never look straight into the light.
Warranty
Any deviation from the intended use is not allowed
and will be considered as improper use. Improper use
means:
• Products that have been modifi ed or repaired by
persons not belonging to HAZET.
• Misuse, improper handling, negligence and any devia-
tion from the intended use or from the instructions
and specifi cations of HAZET or
• Use in combination with any other product, device,
component or system that is damaged, may cause
malfunction or is not intended for use in combination
with this tool.
EC Declaration of Conformity
The manufacturer:
HAZET-WERK Hermann Zerver GmbH & Co. KG
Güldenwerther Bahnhofstraße 25-29
42857 Remscheid – GERMANY
confi rms hereby under sole responsibility
that the following products:
Brand: HAZET
Product description: LED Pen Light
Model No.: 1979-11
We declare that the above designated product is in
complience with the following European Community
Directives 2011/65/EU (RoHS II), Electromagnetic com-
patibility 2014/30/EU and 2014/35/ EU Low Voltage.
Furthermore we declare that the product is in compliance
with the following standards:
EN 55015:2013+A1:2015
EN 61547:2009
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 55014-1:2017
EN 55014-2:2015
Person authorized to compile the technical fi le:
Sandra Müller, Tel.: +49 (0) 2191 792 319
Date: July 17th, 2020
Date: July 17th, 2020
Guido Schmidt
HAZET-WERK Hermann Zerver GmbH & Co. KG
Güldenwerther Bahnhofstr. 25-29
42857 Remscheid
Disposal
For disposal the light and the Lithium-Ion
battery must be supplied to the respective
public recycling system.
Werbung
