Technical Data; Vibration Information - AEG US 900 XE Betriebsanleitung

TECHNICAL DATA

Reciprocating Saw
Production code
Rated input
Stroke rate under no-load
Lengths of stroke
Weight according EPTA-Procedure 01/2014
Noise information
Measured values determined according to EN 62841. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=5dB(A))
Sound power level (Uncertainty K=5dB(A))
Wear ear protectors!

Vibration information

Vibration total values (triaxial vector sum) determined according to EN 62841
Cutting boards with sawblade BIM, dimension 152,5 x 1,2 mm and tooth pitch 4,2 mm
Vibration emission value a
h, B
Uncertainty K=
Cutting wooden beams with sawblade BIM, dimension 152,5 x 1,2 mm and tooth pitch 4,2 mm
Vibration emission value a
h, WB
Uncertainty K=
WARNING!
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 62841 and
may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with
different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running
but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
WARNING Read all safety warnings, instructions,
illustrations and specifications provided with this power tool.
Failure to follow all instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
SABRE SAW SAFETY WARNINGS
Hold the power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring or its own cord. Cutting accessory con-
tacting a "live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
Use clamps or another practical way to secure and support
the workpiece to a stable platform. Holding the work by hand
or against your body leaves it unstable and may lead to loss of
control.
Additional Safety and Working Instructions
Use protective equipment. Always wear safety glasses when
working with the machine. The use of protective clothing is re-
commended, such as dust mask, protective gloves, sturdy non-slip
footwear, helmet and ear defenders.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Use a dust absorption system and wear a
suitable dust protection mask. Remove deposited dust thoroughly,
e.g. with a vacuum cleaner.
Do not reach into the machine while it is running. Chips and splin-
ters must not be removed while the machine is running.
Always use the protective shields on the machine.
Do not use cracked or distorted saw blades.
Plunge cuts without pre-drilling a hole are possible with soft ma-
terials (wood, light building materials for walls). Harder materials
(metals) must first be drilled with a hole corresponding to the size
of the saw blade.
Always place the guide shoe on the workpiece when sawing.
Clamp your workpiece with a clamping device. Unclamped workpie-
ces can cause severe injury and damage.
To avoid unintended start of the product, place down tool only on
even surfaces.
Do not machine any materials that present a danger to health (e.g.
asbestos).
Switch the device off immediately if the insertion tool stalls! Do
US 900 XE
4584 00 04...
4584 05 04...
... 000001-999999
900 W
0-3500 min
-1
19 mm
2,9 kg
89,5 dB(A)
100,5 dB(A)
GB
18,3 m/s
2
1,5 m/s
2
20,0 m/s
2
1,5 m/s
2
English
9 9