ulsonix FLOORCLEAN 30DS Bedienungsanleitung Seite 5

EN
U S E R M A N U A L
TECHNICAL DATA
Parameter description Parameter value
Product name Wet and Dry Vacuum Cleaner
FLOOR- FLOOR- FLOOR-
Model CLEAN CLEAN CLEAN
30DS 30D 25DS
Rated voltage [V~]/
230/50
Frequency [Hz]
Rated power [W] 1,400
Capacity [l] 30 25
Vacuum [kPa] ≤21
Length of the suction
2 1.5 2
hose [m]
Maximum socket
2,000
load [W]
Protection class I II I
Protection rating IP IPX4
40x32
Dimensions [mm] 40x32x69
x60
Weight [kg] 8.1 7.9 7.7
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines, using state-of-the-art technologies and
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement. The device
is designed to reduce noise emission risks to a minimum,
taking into account technological progress and noise
reduction opportunities.
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
ATTENTION! Electric shock warning!
8
Protection class I equipment with basic
insulation. Applies only to FLOORCLEAN 30DS
and FLOORCLEAN 30DSP models.
Class II protection device with double insulation.
Applies only to the FLOORCLEAN 30D model.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details, it may
differ from the actual product.
The original operation manual is in German. Other
language versions are translations from German.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in serious injury or even
death.
The terms "device" or "product" are used in the warnings
and instructions to refer to <Wet and Dry Vacuum Cleaner>.
Do not use in very humid environments or in the direct
vicinity of water tanks. Prevent the device from getting wet.
Risk of electric shock! Do not cover air inlets / outlets! Do
not put your hands or other items inside the device while it
is in use! Do not cover the ventilation openings!
2.1. ELECTRICAL SAFETY
a) The plug must fit the socket. Do not modify the
plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
b) Avoid touching earthed elements such as pipes,
heaters, boilers and refrigerators. There is an
increased risk of electric shock if the earthed device
is exposed to rain, comes into direct contact with
a wet surface or is operating in a damp environment.
Water getting into the device increases the risk of
damage to the device and of electric shock.
c) Do not touch the device with wet or damp hands.
d) Use the cable only for its designated use. Never use it
to carry the device or to pull the plug out of a socket.
Keep the cable away from heat sources, oil, sharp
edges or moving parts. Damaged or tangled cables
increase the risk of electric shock.
e) If using the device in a damp environment cannot
be avoided, a residual current device (RCD) should
be applied. The use of an RCD reduces the risk of
electric shock.
f) Do not use the device if the power cord is damaged
or shows obvious signs of wear. A damaged power
cord should be replaced by a qualified electrician or
the manufacturer's service centre.
g) To avoid electric shock, do not immerse the cord,
plug or device in water or other liquids.
2.2. SAFETY IN THE WORKPLACE
a) Make sure the workplace is clean and well lit. A messy
or poorly lit workplace may lead to accidents. Try
to think ahead, observe what is going on and use
common sense when working with the device.
b) Do not use the device in a potentially explosive
environment, for example in the presence of
flammable liquids, gases or dust.
c) If you discover damage or irregular operation,
immediately switch the device off and report it to
a supervisor without delay.
03.06.2019
Examples of technical failures:
• A sudden stop of the device operation
• Burning smell
• Damage to the hose
• Deformed or hot parts of the device
• Device not working
• Malfunction of the electrical outlet or plug
d) If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
e) Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
f) In case of fire, use a powder or carbon dioxide
(CO ) fire extinguisher (one intended for use on live
2
electrical devices) to put it out.
g) Please keep this manual available for future
reference. If this device is passed on to a third party,
the manual must be passed on with it.
h) Keep packaging elements and small assembly parts
in a place not available to children.
i) If this device is used together with another
equipment, the remaining instructions for use shall
also be followed.
2.3. PERSONAL SAFETY
a) Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b) The device may be used by children over 8 years of
age and persons with limited mental, sensory and
mental functions or lacking adequate experience
and/or knowledge, provided that they are supervised
by a person responsible for their safety or have
received instructions from that person on how to
operate the device safely and they understand the
risks involved.
c) To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
d) Do not overestimate your abilities. When using the
device, keep your balance and remain stable at all
times. This will ensure better control over the device
in unexpected situations.
e) The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
2.4. SAFE DEVICE USE
a) Do not overload the device. Use the appropriate
tools for the given task. A correctly-selected device
will perform the task for which it was designed better
and in a safer manner.
b) Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
c) Disconnect the device from the power supply
before commencement of adjustment, cleaning and
maintenance. Such a preventive measure reduces
the risk of accidental activation.
d) Keep the device in perfect technical condition.
Before each use check for general damage and
especially check for cracked parts or elements and
for any other conditions which may impact the safe
operation of the device. If damage is discovered,
hand over the device for repair before use.
03.06.2019
9 EN
e) Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
f) To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
g) Do not leave this appliance unattended while it is in
use.
h) Clean the device regularly to prevent stubborn grime
from accumulating.
i) Do not cover the air intake and outlet.
j) The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
k) It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
l) Keep the device away from sources of fire and heat.
m) Before and after use, always empty the tank and
clean the vacuum cleaner to avoid accumulation of
substances which may cause a fire inside the device.
n) During use, check the hoses and the device for
overheating. If you notice signs of overheating, turn
the device off and let it cool down.
o) Do not use the device with no filter installed.
p) Do not move the device when the clamps are
unlocked, as this may cause damage to the device
q) Always unplug the device when it is not in use. This
will eliminate the possibility of electric shock or fire
due to damaged device insulation.
r) Do not place metal objects in the electrical outlet of
the device as this may lead to electric shock.
s) Do not pull or lift the device by pulling it by the hose,
as this may cause the device to fall or damage the
hose.
t) Move the device only by holding the handle.
u) Do not use the device to vacuum embers or
flammable objects such as cigarettes/gasoline/
printing ink/solvent, etc.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there is
still a slight risk of accident or injury when using the
device. Stay alert and use common sense when using
the device.
3. USE GUIDELINES
The device is designed for dry and wet vacuuming. The
device has an air blow function.
The user is liable for any damage resulting from
unintended use of the device.