Herunterladen Inhalt Inhalt Diese Seite drucken

Radio Operation - Roadstar HIF-1993BT Bedienungsanleitung

Wooden home hi-fi system
Vorschau ausblenden Andere Handbücher für HIF-1993BT:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 12
3
English
TO USE THE RADIO
1.
Set the Mains [POWER SWITCH] (0) to ON;
2.
Press the [POWER] button (2) to turn ON the unit;
3.
Select the desired audio source by pressing the [SOURCE] button (7 to 11);
4.
(Please see detailed instructions for each Source in the following chapters);
5.
Adjust the volume with the [VOLUME KNOB] (3) to the desired level;
6.
Press and hold the [POWER] button (2) to turn OFF the unit.
Note: When no sound is produced, the unit will switch OFF automat. after 10 minutes.

RADIO OPERATION

1. Press the [FM] button (8);
2.
Adjust radio frequency to your desired station
(19).
Note: For a better reception move the wired antenna (23) around.
TURNTABLE OPERATION
Note: When using the turntable for the first time, unscrew in clockwise sense the
[TRANSPORT SCREW] (27) located on the upper right side of the turntable.
1. Press the [PHONO] button (11);
2. Place a record on the turntable. Place the EP adapter over the central spindle
when playing 45 rpm records;
3. Set the [SPEED SELECTOR] (31) to 33, 45 or 78 rpm according to the record;
4. Release the [TONEARM CLAMP] (29), and remove the stylus protector;
5. Lift up the [TONEARM] (28) with the [LIFT LEVER] (30);
6. Move the [TONEARM] (28) to the beginning of the record;
7. Lift down the [TONEARM] (28) with the [LIFT LEVER] (30);
8. When the record is finished the [TONEARM] (28) will automatically return to the
rest support and the [PLATE] (26) will stop turning. To stop manually, lift up the to-
nearm from the record and return it to the rest support.
Note: Do not stop or turn the [PLATE] (26) manually.
When the unit is moved or transported:
Lock the [TONEARM] (28) with the [TONEARM CLAMP] (29);
Place the protective cap on the stylus (even when not in use);
Screw the [TRANSPORT SCREW] (27) counterclockwise until you feel resistan-
ce (do not screw it completely).
CD-MP3 OPERATION
1. Press the [CD] button (9);
2.
Press
[OPEN/CLOSE] (18) to
label up in the CD compartment.
3.
Close the
[CD DOOR]
automatically from the first track.
PROGRAMMING
Up to 99 tacks (MP3, 20 in CD) can be programmed and play in any order.
open the
[CD DOOR]
(12). Focus search is performed and playback will start
by turning the [TUNING KNOB]
(12) and place a CD with the

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis