Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. Attributes
With this HDMI switch you can connect up to three devices to an HDMI port. The
switch detects if a connected device is turned on and switches automatically to
the appropriate channel. Optionally, you can also switch manually between three
channels by using the button on the top of the device or the remote control.
4. Initial startup
Please take the HDMI switch and the remote control out of the package. Remove
the strip that is sticking out of the battery compartment on the backside. Turn off
all devices you want to connect. Now you have to link the switch with an appro-
priate HDMI cable.
Devices which are built for the European market, should always provide a 5 volt
power supply according to the HDMI specifications. However, some devices are
not able to provide this energy.
In this case, there is a DC hollow plug power on the HDMI switch where can feed
voltage (5V DC). So it is easy to establish a connection with the help of the included
DC hollow plug power. You only have to plug it into a properly wired outlet and
connect the DC hollow plug power with the HDMI switch.
This HDMI switch conatins an USB Type A socket, which can be used to charge USB
devices like Smartphones.
5. Auto-Select function
The HDMI switch will automatically select the active port. It has the following pri-
ority: Input 1 > Input 2 > Input 3.
Once you have connected and switched on a new source, the HDMI will switch
automatically to this input. When the current active source is turned off, the HDMI
switch will switch automatically to the next higher input receiving an active signal.
8
English
Werbung
