Start-Up Procedure - Revox B261 Bedienungsanleitung

1
STARTUP PROCEDURE
1.1
General
1.1.1
Checks prior to AC power connec-
tion
-
Check setting of
line
voltage selector
l42l.lt
it does not match your local line voltage,
it
can
be
adjusted with
a
screwdriver
in
which
case it is absolutely essential
to
check the
rating
of the power
fuse. Disconnect
the
power cord and remove cover of
line
volt-
age
selector [48] by unfastening
one
screw
with
a
Philips screwdriver.
The
recom-
mended fuse ratings are also listed on the
underside of this
cover.
1.1.2
Startup preparations
-
Check power connection according to Sec-
tion
1.1.1.
-
Connect antenna (refer to Section 4.2,
an-
tennas).
-
Establish audio
connections:
OUTPUT FIXED
:
socket
with fixed output
level. The 8251 amplifier can
be
connected
to this
output.
OUTPUT VARIABLE
:
socket
with
adjust-
able output level
With
this output the tuner
can be matched to any amplifier.
DIN socket
:
for
devices equipped with
standard DIN
input.
Either an amplifier (same level as OUTPUT
FIXED)
ora tape recorderwith DIN inputcan
be connected to this socket.
-
Connect tuner
to AC
outlet. The
DIRECT
LED
[11]
(stand-by
pilot
lamp) turns on
as
soon
as
the tuner is connected.
-
SeTTHRESHOLD STATION
t25l
and THRE-
SHOLD STEREO
l27l
to zero, set
DISPLAY
rotary switch [23] to FREOUENCY position.