English; User Instructions; Push Button - FIT BIKE RACE MAGNETIC HOME Benutzeranweisungen

Race Magnetic

English

User instructions

PUSH BUTTON

DISPLAY
TIME
SPEED (SPD)
DISTANCE (DIST)
RPM
TOTAL DISTANCE (ODO)
CALORIES (CAL)
General usage:
With the push button you can navigate through the different information displays.
1.
Press and hold the push button to do an entire RESET.
2.
When SCAN is displayed on the screen, the screen will change between the
3.
information displays every 8 seconds.
If the device does not receive a signal for a few minutes, it will switch off and erase
4.
the values automatically (with the exception of the total distance 'ODO').
Adjust resistance
Manual – Spinningbike – FitBike – Race Magnetic Home – FFIC007
To navigate through the different information displays.
DISPLAY
00:00 – 99:59
00.00 – 99.99
0000 – 9999
0000 – 9999
0000 – 9999
0000 – 9999
Home
FUNCTION
Current training time
Current speed
Current distance
Current rotations per minute
Total distance covered on the device
Current burned calories
Emergency stop / Brake
10