Herunterladen Diese Seite drucken

Lepa AquaChanger 120 Installationsanleitung Seite 10

Werbung

Step 3-1
EN
Install the back plate on the back of motherboard; place the stand-off
on the motherboard to fix the back plate.
DE
Platzieren Sie die Backplate auf der Rückseite des Mainboards und
schrauben Sie sie mit den Abstandshaltern fest.
FR
Installer la plaque arrière sous la carte-mère; placer le support-vis sur
la carte mère pour fixer la plaque arrière.
ES
Instale la placa trasera en la parte trasera de la placa base y coloque los
separadores en la placa base para fijar la placa.
IT
Installare la piastra posteriore nella parte posteriore della scheda madre
e posizionare i distanziatori sulla scheda madre per fissare la piastra.
PL
Umieść płytę mocującą (backplate) pod płytą główną i wkręć za pomocą
nakrętek mocujących.
TW
將背板置入主機板背面;將黑色套桶套入定位螺絲以固定背板。
CN
将背板放置在主板下面,将黑色套筒套入定位螺丝用以固定背板。
JP
Position Screwを差し込んだ
D
Stand-offを使用してBack Plateを固定します。
F
KR
Back plate를 motherboard 뒷면에 설치 한 다음에 절연체를 motherboard에 놓습니다.
ID
Pasang back plate pada bagian belakang motherboard, tempatkan stand off pada motherboard untuk
mengencangkan back plate.
RU
Установите крепёжную пластину к обратной стороне на материнской плате и закрепите винты на
материнской плате.
LGA775/1150/1155/1156/1366
Back Plateをマザーボードの裏側から配置、
C
http://www.lepatek.com
F
D
C
8

Werbung

loading

Verwandte Produkte für Lepa AquaChanger 120

Diese Anleitung auch für:

Lpwac120-hf