Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The eye protection must be capable of stopping flying
debris generated by various operations.
The dust mask or respirator must be capable of
filtrating particles generated by your operation. Prolon-
ged exposure to high intensity noise may cause hea-
ring loss.
► Keep bystanders a safe distance away from the
work area. Anyone entering the work area must
wear personal protective equipment.
Fragments of workpieces or of a broken accessory
may fly away and cause injury beyond immediate
area of operation.
► Position the cord clear of the moving accessory.
If you lose control of the power tool, the cord may be
cut or snagged and your hand or arm may be pulled
into the spinning accessory.
Additional safety warnings
Wear safety goggles.
► Use suitable detectors to determine if utility lines
are hidden in the work area or call the local utility
company for assistance.
Contact with electric lines can lead to fire and electric
shock. Damaging a gas line can lead to explosion.
Penetrating a water line causes property damage or
may cause an electric shock.
► When working screed, use dust extraction. The
vacuum cleaner must be approved for the extrac-
tion of stone dust.
Using this equipment reduces dust-related hazards.
► When working with the machine, always hold it
firmly with both hands and provide for a secure
stance.
The power tool is guided more securely with both
hands.
► Never use the machine with a damaged cable. Do
not touch the damaged cable and pull the mains
plug when the cable is damaged while working.
Damaged cables increase the risk of an electric shock.
Wolff GmbH & Co KG | D-74360 Ilsfeld | Ungerhalde 1 | Fon: +49 (0)7062-91556-0 | Fax: +49 (0)7062-91556-41 | www.wolff-tools.de
All manuals and user guides at all-guides.com
Noise/vibration information
Measurements determined in accordance with
EN 60745
The A-rated sound pressure level of the machine
is normally
Sound pressure level ............................. dB(A)
Sound power level...................................dB(A)
Margin of error ..........................................K=d
Overall vibration values
(vector sum of three directions)
determined in accordance with EN 60745:
Vibration emission level .....................ah =
Margin of error .....................................K =
The vibration emission level indicated in this informa-
tion sheet has been measured in accordance with
a standardised test specified in EN 60745 and may be
used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for
different applications, with different acces sories or poorly
maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job. This
may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator
from the effects of vibration include: main taining the tool
and the accessories, keeping hands warm, organisation of
work patterns.
Wear hearing protection.
WARNING
Wear hearing protection!
EN
54
67
+/-1,5
< 4.5 m/s²
+/-1,5 m/s²
19
Werbung
Inhaltsverzeichnis
