Service information
Maintenance of a medical device is wholly the responsibility of the owner of that device. Failure to maintain
a device in accordance with the instructions may invalidate the device's warranty. Furthermore, failure to
maintain a device may compromise the clinical condition or safety of users and/or their caregivers. Do not
perform service and maintenance while the user is in the product.
1st Day
•
Read the User Guide carefully before use and
store it in a safe place for future reference
•
Store the enclosed tools on/at the product
Daily
•
Use a dry cloth to clean the product
•
Visual inspection. Repair or replace any
damaged or worn-out parts
•
Ensure that all fasteners are in place and fitted
correctly
•
Check all fittings and buckles for signs of worn
out parts
•
Be aware of any MAX mark indications before
adjustment
Weekly
•
Check that all castors are moving freely and
that all wheel locks/brakes are easily activated
•
Wipe off any residue and dirt from the product
using a cloth with warm water and a mild
detergent/soap and dry before use
•
The column angle is adjustable and it is posible
to lock it in position
•
Disinfect the product. please check the
disinfection section in this User Guide for more
information
Monthly
•
All nuts and bolts on this product must be
checked and tightened to avoid unnecessary
failures
•
Oil the swing-away parts. We recommend you
use a professional lubricant system
Annually
•
Inspect the frame for cracks or signs for worn-
out parts and carry out annual service. Never
use a product which appears to be substandard
or faulty
etac.com
Warewashing machine
This product can be washed at 60°C using a mild
detergent in 15-20 minutes in a washing machine
designed for medical devices. Use the machine's
drying function to dry the product. Clean the
accessories seperately.
Before washing remove the following items and
clean them separately:
•
Accessories
•
Cushioning
Disinfection
The product without accessories can be disinfected
with a 70% disinfectant IPA solution. It is
recommended to wipe off any residue and dirt from
the product, using a cloth with warm water and a
mild detergent/soap without chlorine and let it dry
before disinfection.
Service interval
A detailed inspection of the product must be made
every 12 months (every 6 months for heavy users)
and every time the product is reissued for use. The
inspection should be carried out by a technically
competent person who has been trained in the use
of the product.
Service Check List:
Check and adjust the following functions as per their
intended use. Repair or replace any damaged or
worn-out parts. Please check the:
•
Castors are moving freely and all wheel locks/
brakes are easily activated
•
The column angle is adjustable and it is posible
to lock it in position
•
Nuts and bolts on the product are tightened
•
Check all fittings and buckles for signs of worn
out parts
•
Product for cracks or signs for worn-out parts
•
All labels on the product are intact
21
EN