AmazonBasics B01E3R7T9K Bedienungsanleitung Seite 11

Troubleshooting
Power switch in auto position
Use thick paper stock or greeting card
 The shredder is constantly running while in "Auto (On)" mode.
1) It is possible that the activation sensor, which starts the shredder, has become blocked with
paper. Insert an index card or any rigid sheet of cardstock (old greeting card or folded file
folder), directly in the center of the feed slot, while applying force to help push the jammed
paper through. This will usually clear any paper blocking the activation sensor and feed slot.
2) The activation sensor is being triggered by dust, debris, or oil. A cotton swab may be
used to clean the sensor. DO NOT USE CANNED AIR. The activation sensor of the shred-
der is located around the center of the feed slot.
to push the jam through
ENGLISH 11