Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instructions
10Z Keystone front panel 8P
Item no. 1760695
Intended use
The product is suitable for installation in a 25.4 cm (10") network cabinet. Up to
8 keystone modules can be installed in the product.
For safety purposes, you must not rebuild and/or modify this product. Using the
product for purposes other than those described above may damage the product.
Read the instructions carefully and store them in a safe place. Only make this
product available to third parties together with its operating instructions.
This product complies with statutory, national and European regulations. All company
and product names are trademarks of their respective owners. All rights reserved.
Package contents
• Front panel
• Operating instructions
Up-to-date Operating Instructions
Download the up-to-date operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with an exclamation mark in a triangle is used to highlight
important information in these operating instructions. Always read this
information carefully.
The arrow symbol indicates special information and advice on how to use
the product.
Safety instructions
Read the operating instructions carefully and observe safety
instructions. If you do not follow the safety information and
information on proper handling in these operating instructions, we
will assume no liability for any resulting personal injury or damage to
property. Such cases will invalidate the warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may
become dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong
jolts, high humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can no
longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a
low height may damage the product.
• Always observe the safety information and operating instructions of any
other devices which are connected to the product.
• Consult a technician if you are not sure how to use or connect the
product, or if you have concerns about safety.
• Maintenance, modifications and repairs must be carried out by a
technician or a specialist repair centre.
• If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.
Installation
• Insert your keystone modules into the front panel.
• The white labels may be labelled with a permanent marker suitable for writing on
metal.
• Attach the front panel to your network cabinet.
Suitable installation material is usually included within the network cabinet's
delivery scope.
Care and Cleaning
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as
these may damage the casing or cause the product to malfunction.
• Use a dry, lint-free cloth to clean the product.
Disposal
The product must not be disposed of with the household waste At the end
of its service life, dispose of the product according to the relevant statutory
regulations.
Technical data
Material ................................... SPCC, ABS
Operating temperature ........... -40 to +70 °C
Dimensions (W x H x D) ......... 255 x 44 x 8.5 mm
Weight .................................... 140 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in
electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is
prohibited. This publication represents the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE.
*1760695_v1_1018_02_IPL_m_en
Werbung
