Chauvet SlimPAR QUAD 6 IRC Schnellanleitung Seite 3

EN
Product
Description
Overview
AC Power
Power Linking
Fuse Replacement
The SlimPAR™ QUAD 6 IRC is a low-profile, four-color par can with a
built-in infrared receiver. The SlimPAR™ QUAD 6 IRC has 6 quad-color
LEDs and is a silent operator with power linking capabilities. It also works
well in series with other quad-color LED par cans in master/slave mode
and features color customization with or without DMX.
DMX In/Out
Microphone
Sensitivity
Adjustment Knob
Microphone
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
You can link up to 39 SlimPAR™ QUAD 6 IRC products at 120 VAC or
up to 75 units at 230 VAC.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
SlimPAR™ QUAD 6 IRC QRG
Control Panel
LED Display
Safety Loop
Back Panel View
3
Power In
Fuse Holder
Power Out