Transport, Packaging And Storage; Inspection After Transport; Packaging; Storage - Casselin CFE4 Handbuch

3. TRANSPORT, PACKAGING AND STORAGE

3.1 Inspection after transport

The check for the absence of damage and the completeness of the device must be carried out upon receipt
of the package. In the event of identification of damage due to transport, refuse or accept the delivered
product only with reservations *. A complaint detailing the defects observed must then be made. The
perception of damage is only possible in the event of a complaint formulated within the prescribed time limits,
ie 24-48 hours at most.
* written on the carrier's delivery papers or digital.

3.2 packaging

The packaging of the device must be kept in case of moving, or for a return to the after-sales service. The
inner and outer packaging must be completely removed before using the device. The standards in force in
your country concerning environmental protection must be observed before destroying the packaging.

3.3. Storage

WARNING
The device can be kept in stock, but only in its original, closed packaging.
Storage can be carried out in accordance with these conditions:
• Storage in a dry and non-humid place
• Sheltered from the sun
• Control of the stock exceeding 2 months (general condition of the device and all the constituent elements)
• No material shaking
• Storage in closed room and not outside.

4. EQUIPMENT CHARACTERISTICS

* Subject to change
Model
Capacity
Electrical data 2000 W / 230 V
Oil pan
Temperature 60 ° C to 190 ° C
Basket W 140 x D 210 x H
dimensions
Dimensions W 220 x D 400 x H
Weight
CFE4
4 L
2 x 2000 W / 230 V
1
60 ° C to 190 ° C
W 140 x D 210 x H
125 mm
W 435 x D 400 x H
315 mm
7 Kg
CFE8
CFE42
2 x 4 L 8 liters
3250 W / 230 V
2
60 ° C to 190 ° C
W 190 x D 240 x H
125 mm 140 mm
L 265 x D 430 x H
315 mm 340 mm
10.5 Kg 7.1 Kg
CFE82
2 x 8 L
2 x 3250 W / 230 V
1 2
60 ° C to 190 ° C
W 190 x D 240 x H
140 mm
W 550 x D 430 x H
340 mm
12.5 Kg
EN