Werbung
Installation and care instructions
GB
We have put together the most important product information
to enable you to benefit from the high degree of functionality and the
first class comfort provided by BLANCO taps.
Parts list BLANCOTETRAS-S HD
1
Hand set
2
Spray hose
Cartridge
3
Fixing kit
4
Technical data
Use
• Pressurised hot water tank and instantaneous
water heater
• Not suitable for low pressure hot water tank/hot
water tank
Operating pressure
• Min. 0.5 bar
• Max. 10.0 bar
Temperature
• Max. 70° C
Note
pressure differences between cold and warm water
connection should be less than 3 bar otherwise the
mixing ratio deviates from the lever position.
Symbols
right
wrong
recommended
Installation
Illustrations
1
Tap hole: 35 mm
2
-
4
Attach tap
NOTE: don't forget the seal between tap
and supporting surface!
Flush the pipe work to remove foreign debris
5
from the system. When the tap has been
connected check for leaks,movement and flow
rate/pattern.
Recommendation: fit dirt filter
6
-
Connect flexi hoses
7
11
further illustrations on the back fold-out flap
-
Spray hose guide
12
14
Rinse perlator/ jet regulator
15
When tap has been fitted check:
tightness, movement, full jet of water
Care
Please note the following advice and the
illustrations on the back fold-out flap.
Illustrations
-
Use soft (microfibre) cloth and mild cleaning
16
18
agent
19
-
20
Take care with hard objects
-
Using the hose spray
21
24
-
Cleaning the perlator/ jet regulator with
25
27
vinegar
Important
in the event of a query, please enter the 11-digit
Article Number (see wrapper on the cold water hose
of your tap) .
Example
n s o n b u y in g
C o n g ra tu la ti o
ta p – w e h o p
th is B L A N C O
a re d e li g h te d
e y o u
w it h it !
2
Werbung
