Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ECO MANUAL
/ Read the instructions before the assembly and use of the device.
1. WARNING
• The dryer should be installed by a duly authorised person.
• The power supply must be cut off before installation.
• An improperly grounded device may cause electric shock.
• The dryer should be connected via a 3-core power supply wire.
• Any repairs carried out by people who do not have the right to do so on their
own may result in the loss of warranty.
2. NOTE
• Do not install the device near a sink. If the power cord is damaged, the device
should not be mounted. In this case, contact the manufacturer or dealer. Conne-
-ction directly to the electrical system without the plug is permitted and does not
affect the warranty conditions, but should be made by a person with an electrical
license and in accordance with current regulations.
• The dryer should be mounted on a solid, durable and stable wall. Do not install
the dryer on a surface made of flammable material.
• In the case of the failure of the dryer, remove the plug from the mains immedia-
tely and contact your dealer.
3. SPECIFICATIONS
Dimensions (mm) | 173 x 255 x 150
Voltage | 220-240V, 50/60 Hz, 1350W
Blast speed | 90 m/s
Drying time | 12 s
Splash-proof performance | IPX1
Protection class | I
Nozzle | NO
Noise level: 70 dB
Casing | stainless steel
Motor | 25 000 rpm
4. INSTALLATION
1/ Installation should be carried out in accordance with the regulations for
assembly of electrical equipment and by a person with appropriate qualifi-
cations.
2/ Using the template supplied with the kit, mark the position of the four screws
with which you will attach the rear wall of the dryer.
3/ Drill four openings.
4/ Unscrew the screws fixing the dryer cover.
5/ Screw the rear wall of the dryer to the wall using the screws and rawlplugs
supplied with the kit.
6/ Tighten the dryer cover with two screws.
7/ Put the plug into the socket and the dryer is ready to use.
5. USAGE
• non-contact actuation (photocell)
• place your hands under the hand dryer - the device will turn on automatically
• rub your hands against each other
• the device switches off when you take your hands
6. CLEANING AND MAINTENANCE
Clean the dryer regularly using a damp cloth soaked in water with soap.
Do not clean with acids or alkalis, do not pour with water.
7. WARRANTY
The dryer is covered by a 24-month warranty. In the case of failure, the device
must be delivered to the manufacturer or distributor who sold it, together with
the proof of purchase.
ECO
5 / EN
Werbung
