Renkforce 1764114 Bedienungsanleitung Seite 2

Operating instructions
19-Inch keystone patch panel, unfitted 45°
Item no. 1764114
Intended use
The product is suitable for installation in a 48.26 cm (19") network cabinet. Up to
24 keystone modules can be installed in the product.
For safety purposes, you must not rebuild and/or modify this product. Using the
product for purposes other than those described above may damage the product.
In addition, improper use can cause hazards such as a short circuit, fire or electric
shock. Read the instructions carefully and store them in a safe place. If you pass the
product on to a third party, please hand over these operating instructions as well.
This product complies with statutory, national and European regulations. All company
and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Patch panel
• 4x screws (M6 x 18 mm)
• 4x cage nuts
• 4x plastic washers
• 24x cable ties (75 x 1.9 mm)
• Operating instructions
Up-to-date Operating Instructions
Download the up-to-date operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with an exclamation mark in a triangle is used to highlight
important information in these operating instructions. Always read this
information carefully.
Safety instructions
Read the operating instructions carefully and observe safety
instructions. If you do not follow the safety information and
information on proper handling in these operating instructions, we
will assume no liability for any resulting personal injury or damage to
property. Such cases will invalidate the warranty/guarantee.
• The device is not a toy. Keep out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become
a dangerous toy for children.
• Protect the product from extreme temperatures, direct sunlight, strong
jolts, high humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can no
longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a
low height may damage the product.
• Always observe the safety information and operating instructions of any
other devices which are connected to the product.
• Consult a technician if you are not sure how to use or connect the
product, or if you have concerns about safety.
• Maintenance, modifications and repairs must be carried out by a
technician or a specialist repair centre.
• If you have any questions that are not answered in these operating
instructions, please contact our technical customer service or other
professionals
Installation
• Insert your keystone modules into the patch panel.
The width of the keystone modules may not exceed 17.4 mm.
• Secure the cables of the keystone modules with cable ties.
• Insert the patch panel in the network cabinet. Fix the patch panel with the supplied
installation material.
• Attach the ground cable to a suitable ground connection.
Care and Cleaning
• Never use aggressive detergents, rubbing alcohol or other chemical solutions as
these can damage the housing or impair the product function.
• Use a dry, lint-free cloth to clean the product.
Disposal
The product must not be disposed of with the household waste. At the end
of its service life, dispose of the product according to the relevant statutory
regulations.
Technical data
Material ..........................................SPCC, 1.2 mm thick, nickel-plated
Operating conditions ......................+10 to +60 °C, 30 – 80 % RH
Storage conditions .........................-40 to +70 °C, 30 – 80 % RH
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in
electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is
prohibited. This publication represent the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE. *1764114_v1_1118_02_IPL_m_en