The Led Display - Palmer AHMCT8 Bedienungsanleitung

THE LED DISPLAY

The following list shows how the connections of the various connectors on the cable tester will be
displayed:
TRS JACK (6.35 MM STEREO JACK)
LED 1: Sleeve
LED 2: Tip
LED 3: Ring
LED 4:
LED 5:
DIN-CONNECTOR
LED 1: Pin 1
LED 2: Pin 2
LED 3: Pin 3
LED 4: Pin 4
LED 5: Pin 5
THE GROUND LED
The "Ground" LED lights up when a pin is connected to the housing of the plug or to the connected device.
THE USE OF TEST PROBES
With the test probes, you can verify a connection manually. Position the test probes at the ends of the cable
to be checked. In the case of a positive connection, a beep sounds and the LED located between the banana
connectors of the test probes lights up.
PHONO (RCA CONNECTOR)
LED 1: Screen
LED 2: Hot
LED 3:
LED 4:
LED 5:
XLR
LED 1: Pin 1
LED 2: Pin 2
LED 3: Pin 3
LED 4:
LED 5:
SPEAKON
LED 1: -1
LED 2: +1
LED 3: -2
LED 4: +2
LED 5:
7